Green-Mode PWM Controller
LD7575
6/5/2007
Green-Mode PWM Controller with High-Voltage Start-Up Circuit
REV: 04a
General Description
www.DataShee...
Description
LD7575
6/5/2007
Green-Mode PWM Controller with High-Voltage Start-Up Circuit
REV: 04a
General Description
www.DataSheet4U.com The LD7575 is a current-mode PWM controller with
Features
z z z z z z z z z z
High-Voltage (500V) Startup Circuit Current Mode Control Non-Audible-Noise Green Mode Control UVLO (Under Voltage Lockout) LEB (Leading-Edge Blanking) on CS Pin Programmable Switching Frequency Internal Slope Compensation OVP (Over Voltage Protection) on Vcc OLP (Over Load Protection) 500mA Driving Capability
excellent power-saving operation.
It features a high-
voltage current source to directly supply the startup current from bulk capacitor and further to provide a lossless startup circuit. The integrated functions such as the leading-edge blanking of the current sensing, internal slope compensation, and the small package provide the users a high efficiency, minimum external component counts, and low cost solution for AC/DC power applications. Furthermore, the embedded over voltage protection, over load protection and the special green-mode control provide the solution for users to design a high performance power circuit easily. DIP-8 package. The LD7575 is offered in both SOP-8 and
Applications
z z z
Switching AC/DC Adapter and Battery Charger Open Frame Switching Power Supply LCD Monitor/TV Power
Typical Application
1
Leadtrend Technology Corporation
LD7575-DS-04a June 2007
LD7575
Pin Configuration
SOP-8 & DIP-8 (TOP VIEW) VCC
6
8
7
OUT
5
NC
HV
www.DataS...
Similar Datasheet