19-3983; Rev 0; 1/06
KIT ATION EVALU E L B A AVAIL
TFT, LCD, DC-DC Converter with Operational Amplifiers
Features
♦ 1....
19-3983; Rev 0; 1/06
KIT ATION EVALU E L B A AVAIL
TFT, LCD, DC-DC Converter with Operational Amplifiers
Features
♦ 1.8V to 5.5V Input Supply Range ♦ 600kHz/1.2MHz Current-Mode Step-Up
Regulator Fast Transient Response to Pulsed Load High-Accuracy Output Voltage (1.5%) Built-In 14V, 1.9A, 0.2Ω n-Channel MOSFET High Efficiency (> 85%) Digital Soft-Start ♦ Two High-Performance Operational Amplifiers ±150mA Output Short-Circuit Current 7.5V/µs Slew Rate 12MHz, -3dB Bandwidth Rail-to-Rail Inputs/Outputs ♦ Logic-Controlled, High-Voltage Switch with Adjustable Delay ♦ Built-In Power-Up Sequence ♦ Input Supply Undervoltage Lockout ♦ Timer Delay Fault Latch for All
Regulator Outputs ♦ Thermal-Overload Protection
General Description
The MAX8739 includes a high-performance, step-up
regulator and two high-current operational amplifiers for active-matrix thin-film
transistor (TFT) liquid-crystal displays (LCDs). The input supply voltage range of the MAX8739 is from 1.8V to 5.5V. The device also includes a logic-controlled, high-voltage switch with adjustable delay. The step-up DC-DC converter provides the regulated www.DataSheet4U.com supply voltage for the panel source driver ICs. The converter is a high-frequency (600kHz/1.2MHz) currentmode
regulator with an integrated 14V n-channel MOSFET that allows the use of ultra-small inductors and ceramic capacitors. It provides fast transient response to pulsed loads while achieving efficiencies over 85%. The two high-performance operational...