Solid State relays
Solid State Relay
G3MB
Low cost Subminiature PCB mounting 2 amp Single in-line package (SIP) SSR
• Bottom is approximat...
Description
Solid State Relay
G3MB
Low cost Subminiature PCB mounting 2 amp Single in-line package (SIP) SSR
Bottom is approximately 3 times smaller than G3M. Low cost “SIP” package switches up to 2A loads. Built in Snubber circuit and input resistor as option. Two footprints available for design flexibility. The G3MB-202PEG-4-DC20MA crosses directly to the Motorola M0C2A-60 series power triac. www.DataSheet4U.com
Ordering Information
To Order: Specify input voltage at end of part number. Example: G3MB-202P-DC24 Isolation Output terminal pitch 7.62 mm Zero cross Yes Input resistor Yes Built-in snubber circuit Yes Rated output load 2 A at 100 to 240 VAC Rated input voltage 5 VDC 12 VDC 24 VDC No 2 A at 100 to 240 VAC 5 VDC 12 VDC 24 VDC 5.08 mm Yes 2 A at 100 to 240 VAC 5 VDC 12 VDC 24 VDC No 2 A at 100 to 240 VAC 5 VDC 12 VDC 24 VDC Yes No No No 2 A at 100 to 240 VAC 2 A at 100 to 240 VAC N/A *(See Note) N/A *(See Note) G3MB-202PEG-4-DC20MA G3MB-202PLEG-4-DC20MA G3MB-202PL-4 G3MB-202P-4 G3MB-202PL Model
Phototriac
G3MB-202P
Note: 1. For versions without input voltage specified, a current limiting resistor must be placed in series with the input. See LED drive specifications and recommendations below. 2. TUV versions available. Contact your local Omron representative.
1
Solid State Relay
G3MB
Specifications
■ Input Rating
Models with Input Resistor
Rated voltage 5 VDC 12 VDC 24 VDC 4 to 6 VDC 9.60 to 14.40 VDC 19.20 to 28.80 VDC Operating range 440 Ω ±20% 1k Ω ±20% 2.20...
Similar Datasheet