MS24A

FORM AE043 ISS2 Comus Group of Companies Manufactured in UK 50.8 (2.38) 38.0 (1.49) PRODUCT DATA SHEET 20.3 (.80) 32.0 (1.26) www.DataSheet4U.com 4.7ø (.18) 300.0 (11.81) Adjustment 3 x round 0.142 PVC covered and insulated Brown: Green: White: 5V 0V O/P Drawings not to scale All dimensions in mm This non-mercury sensor has been designed to detect movement or vibration. The sensor will react when disturbed by giving a fleeting change of state (ie normally open to normally closed or vice versa). The time taken to settle depends on the amount of energy absorbed by the sensor; the settled state will normally be closed. The sensors contacts, when undisturbed, are normally closed, however it is possible to mount the switch with contacts open therefore we recommend that applications look for change of state not contact open or closed. This product offers additional sensitivity adjustment via an internal potentiometer. The output is referenced to 0V and can drive a transistor or similar device. SPECIFICATION SUPPLY VOLTAGE SUPPLY CURRENT OUTPUT OPERATING TEMPERATURE STORAGE TEMPERATURE CASE MATERIAL Max. Vdc Max. mA Deg. ˚C Deg. ˚C 5 40 24mA at 5Vdc -10˚ + 70˚ -10° +75° ABS This product is fully sealed to give maximum mechanical protection and minimise the ingress of dust and moisture. As a guide, the product is expected to meet the requirements of IP65. MOVEMENT / VIBRATION MODULE Buffered Analogue Output - Non Mercury Contacts Rev. No. E Revision Note Web Site 2001 Date 1...