DatasheetsPDF.com

IXDN402 Dataheets PDF



Part Number IXDN402
Manufacturers IXYS Corporation
Logo IXYS Corporation
Description (IXDx402) 2 Ampere Dual Low-Side Ultrafast MOSFET Drivers
Datasheet IXDN402 DatasheetIXDN402 Datasheet (PDF)

IXDN402 / IXDI402 / IXDF402 2 Ampere Dual Low-Side Ultrafast MOSFET Drivers Features • Built using the advantages and compatibility of CMOS and IXYS HDMOSTM processes • Latch-Up Protected Over Entire Operating Range • High Peak Output Current: 2A Peak • Wide Operating Range: 4.5V to 25V www.DataSheet4U.com • High Capacitive Load Drive Capability: 1000pF in <10ns • Matched Rise And Fall Times • Low Propagation Delay Time • Low Output Impedance • Low Supply Current • Two Drivers in Single Chip G.

  IXDN402   IXDN402



Document
IXDN402 / IXDI402 / IXDF402 2 Ampere Dual Low-Side Ultrafast MOSFET Drivers Features • Built using the advantages and compatibility of CMOS and IXYS HDMOSTM processes • Latch-Up Protected Over Entire Operating Range • High Peak Output Current: 2A Peak • Wide Operating Range: 4.5V to 25V www.DataSheet4U.com • High Capacitive Load Drive Capability: 1000pF in <10ns • Matched Rise And Fall Times • Low Propagation Delay Time • Low Output Impedance • Low Supply Current • Two Drivers in Single Chip General Description The IXDN402/IXDI402/IXDF402 consists of two 2 Amp CMOS high speed MOSFET drivers. Each output can source and sink 2A of peak current while producing voltage rise and fall times of less than 15ns to drive the latest IXYS MOSFETs & IGBTs. The input of the driver is TTL or CMOS compatible and is fully immune to latch up over the entire operating range. A patent-pending circuit virtually eliminates cross conduction and current shoot-through. Improved speed and drive capabilities are further enhanced by very low and matched rise and fall times. The IXDN402 is configured as a dual non-inverting gate driver, the IXDI402 as a dual inverting gate driver, and the IXDF402 as a dual inverting + non-inverting gate driver. The IXDN402/IXDI402/IXDF402 family are available in the standard 8 pin P-DIP (PI), SOP-8 (SIA) and SOP-16 (SIA16) packages. For enhanced thermal performance, the SOP-8 and SOP-16 are also available with an exposed grounded backmetal package as the SI and SI-16 respectively. Applications • • • • • • • • • Driving MOSFETs and IGBTs Motor Controls Line Drivers Pulse Generators Local Power ON/OFF Switch Switch Mode Power Supplies (SMPS) DC to DC Converters Pulse Transformer Driver Class D Switching Amplifiers Ordering Information Part Number Package Type Temp. Range IXDN402PI 8-Pin PDIP IXDN402SI 8-Pin SOIC with Grounded Backmetal -55°C to IXDN402SIA 8-Pin SOIC +125°C IXDN402SI-16 16-Pin SOIC with Grounded Backmetal IXDN402SIA-16 16-Pin SOIC IXDI402PI 8-Pin PDIP IXDI402SI 8-Pin SOIC with Grounded Backmetal -55°C to IXDI402SIA 8-Pin SOIC +125°C IXDI402SI-16 16-Pin SOIC with Grounded Backmetal IXDI402SIA-16 16-Pin SOIC IXDF402PI 8-Pin PDIP IXDF402SI 8-Pin SOIC with Grounded Backmetal -55°C to IXDF402SIA 8-Pin SOIC +125°C IXDF402SI-16 16-Pin SOIC with Grounded Backmetal IXDF402SIA-16 16-Pin SOIC NOTE: Mounting or solder tabs on all packages are connected to ground Configuration Dual Non Inverting Dual Inverting Inverting + Non Inverting Copyright © IXYS CORPORATION 2002 First Release IXDN402 / IXDI402 / IXDF402 Figure 1 - IXDN402 Dual 2A Non-Inverting Gate Driver Functional Block Diagram Vcc IN A ANTI-CROSS CONDUCTION CIRCUIT * P OUT A N www.DataSheet4U.com IN B ANTI-CROSS CONDUCTION CIRCUIT * P OUT B N GND Figure 2 - IXDI402 Dual Inverting 2A Gate Driver Functional Block Diagram Vcc IN A ANTI-CROSS CONDUCTION CIRCUIT * P OUT A N IN B ANTI-CROSS CONDUCTION CIRCUIT * P OUT B N GND Figure 3 - IXDF402 Inverting + Non-Inverting 2A Gate Driver Functional Block Diagram Vcc IN A ANTI-CROSS CONDUCTION CIRCUIT * P OUT A N IN B ANTI-CROSS CONDUCTION CIRCUIT * P OUT B N GND * Patent Pending 2 IXDN402 / IXDI402 / IXDF402 Absolute Maximum Ratings (Note 1) Parameter Supply Voltage All Other Pins Junction Temperature Storage Temperature Lead Temperature (10 sec) Value 25 V -0.3 V to VCC + 0.3 V 150 oC -65 oC to 150 oC 300 oC Operating Ratings Parameter Operating Temperature Range Thermal Impedance (To Ambient) 8 Pin PDIP (PI) (θJA) 8 Pin SOIC (SIA) (θJA) 16 Pin SOIC (SIA-16) (θJA) Value -55 oC to 125 oC 130 oC/W 120 oC/W 120 oC/W www.DataSheet4U.com Electrical Characteristics Unless otherwise noted, TA = 25 oC, 4.5V ≤ VCC ≤ 25V . All voltage measurements with respect to GND. IXDD402 configured as described in Test Conditions. All specifications are for one channel. Symbol VIH Parameter Test Conditions Min 3 Typ Max 2.4 Units V V V µA V High input voltage Low input voltage Input voltage range Input current High output voltage Low output voltage Output resistance @ Output high Output resistance @ Output Low Peak output current Continuous output current Rise time Fall time On-time propagation delay Off-time propagation delay Power supply voltage Power supply current VCC = 18V VCC = 18V VCC is 18V 0V ≤ VIN ≤ VCC VIL VIN IIN VOH VOL ROH ROL IPEAK IDC tR tF tONDLY tOFFDLY VCC ICC -5 -10 VCC - 0.025 VCC + 0.3 10 0.025 3.7 2.5 2 1 CL=1000pF Vcc=18V CL=1000pF Vcc=18V CL=1000pF Vcc=18V CL=1000pF Vcc=18V 7 7 27 25 4.5 VIN = 3.5V VIN = 0V VIN = + VCC 8 8 28 26 18 1 0 10 9 32 30 25 3 10 10 4 3 V Ω Ω A A ns ns ns ns V mA µA µA Specifications Subject To Change Without Notice 3 IXDN402 / IXDI402 / IXDF402 Pin Description SYMBOL IN A GND IN B OUT B VCC OUT A FUNCTION A Channel Input Ground B Channel Input B Channel Output Supply Voltage A Channel Output DESCRIPTION A Channel Input signal-TTL or CMOS compatible. The system ground pin. Internally connected to all circuitry, this pi.


2SC4081UB IXDN402 IXDI402


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)