polyfet rf devices
Power RF Amplifiers
Power = 30 Watts 450 to 470 Mhz Vdd =12.5 Volts Bandwidth = Gain = 25 dB
www.Data...
polyfet rf devices
Power RF Amplifiers
Power = 30 Watts 450 to 470 Mhz Vdd =12.5 Volts Bandwidth = Gain = 25 dB
www.DataSheet4U.com
PHM003
50 ohms Input/Output Impedance
Description
The PHM003 is a high gain high power amplifier design for the Tetra frequency range. It has two stages and uses the latest Ldmos technology
transistors. The amplifier has very high gain and high efficiency and has a IP3 of 50 dBm
Abosolute Maximum Ratings ( T = 25 C)
Parameter DC supply Voltage Input Power Output Power Operating Case Temp. Storage Temp. Symbol Value Unit 17 Vds V 0.13 Pin W 40 Pout W o -20 to +70 Tc C Tstg -30 to +100 o C
o
Electrical Characteristics: ( T = 25 C Zs=Zl=50 ohms. Vdd =12.5Volts )
Parameter Symbol Frequency Range BW Output Power Po Power Gain PG Total Efficiency η 2nd Harmonics dso Intermod - 2 tone Ip3 Load MismatchTolerance VSWR Min
450 30 25 40 45
o
Typical
Max
470
10:1
Unit Mhz Watts dB % dBc dBm Relative
Test Conditions 50 ohm load Idq = 0.7 Amps @ Pout = 30 Watts @ Pout = 30 Watts @ Pout = 30 W. Freq = 460 Mhz Freq = 460 Mhz All Phase Angles
POLYFET RF DEVICES
Revision Date
6/1/98
1110 Avenida Acaso, Camarillo, CA 93012 TEL:(805) 484-4210 FAX:(805) 484-3393 EMAIL:
[email protected] URL:w w w .polyfet.com
PHM003
PHM003 Output Power, Gain, Vs. Input Power PHM003 Gain, Efficiency, Vs . Frequency
30 60
30
Gain (dB) Pout (W)
32 20 10 0 0
f=460MHz Vds=12.5V Idq=0.35A+0.35
Gain (dB)
25 20 15 10 450 Pout=30W Vd=12.5v Idq=0.35A+0.35A 455 460
Gain
50...