Highly Integrated Green-Mode PWM Controller
SG5841J — Highly Integrated Green-Mode PWM Controller
SG5841J — Highly Integrated Green-Mode PWM Controller
Features
...
Description
SG5841J — Highly Integrated Green-Mode PWM Controller
SG5841J — Highly Integrated Green-Mode PWM Controller
Features
Green-Mode PWM Controller Low Startup Current : 14µA Low Operating Current: 4mA Programmable PWM Frequency with Hopping Peak-Current-Mode Control Cycle-by-Cycle Current Limiting Synchronized Slope Compensation Leading-Edge Blanking (LEB) Constant Output Power Limit Totem Pole Output with Soft Driving VDD Over-Voltage Clamping Programmable Over-Temperature Protection (OTP) Internal Open-Loop Protection VDD Under-Voltage Lockout (UVLO) GATE Output Maximum Voltage Clamp:18V
Applications
General-purpose, switch-mode, power supplies and flyback power converters, including:
Power Adapters Open-Frame SMPS
Description
The highly integrated SG5841/J series of PWM controllers provides several features to enhance the performance of flyback converters.
To minimize standby power consumption, a proprietary green-mode function provides off-time modulation to continuously decrease the switching frequency at lightload conditions. This green-mode function enables the power supply to meet international power conservation requirements. To further reduce power consumption, SG5841/J is manufactured using the BiCMOS process. This allows a low startup current, around 14µA, and an operating current of only 4mA. As a result, a large startup resistance can be used.
The built-in synchronized slope compensation achieves stable peak-current-mode control....
Similar Datasheet