Low Power 5V / 3.3V uP Reset Active
November 2003
rev 1.0
ASM8500
Low Power 5V / 3.3V µP Reset Active LOW, Open - Drain Output
• • Printers Single board c...
Description
November 2003
rev 1.0
ASM8500
Low Power 5V / 3.3V µP Reset Active LOW, Open - Drain Output
Printers Single board computers
General Description
The ASM8500 is a voltage supervisory device with a low-power, 5V/3.3V µP Reset, active LOW, open-drain output. Maximum supply current over temperature is a low 6µA. The ASM8500 generates an active LOW reset signal whenever the monitored supply is out of tolerance. A precision reference and comparator circuit monitor power supply (VCC) level. Reset threshold tolerance level is ±1.5%. When an out-of-tolerance condition is detected, an internal power-fail signal is generated which forces an active LOW reset signal. After VCC returns to an in-tolerance condition, the reset signal remains active for www.DataSheet4U.com 1.5ms to allow the power supply and system microprocessor to stabilize. The ASM8500 is designed with a open-drain output stage and operates over the extended industrial temperature range. Devices are available in compact surface mount SOT-89 packages. Other low power products in this family include the ASM1810/ 11/12/15/16/17, ASM1233D and ASM1233M.
Typical Operating Circuit
VCC
ASM8500
Microprocessor
RESET RESET
GND
Block Diagram
VCC
Key Features
Low Supply Current 6 µA maximum (5.5 V) Automatically restarts a microprocessor after power failure 1.5ms reset delay after VCC returns to an in-tolerance condition Active LOW power-up reset Precision temperature-compensated voltage reference and compa...
Similar Datasheet