China Electronics Technology Group Corporation No.26 Research Institute
160MHz SAW Filter 18MHz Bandwidth
Part Number: ...
China Electronics Technology Group Corporation No.26 Research Institute
160MHz SAW Filter 18MHz Bandwidth
Part Number: LBT16037
www.sipatsaw.com
SIPAT Co., Ltd.
Specifications
Parameter Center Frequency
Insertion Loss 3 dB Bandwidth 30 dB Bandwidth
www.DataSheet4U.com 40 dB Bandwidth
Unit
MHz dB MHz MHz MHz MHz dB usec
Minimum
159.9 18 45
Typical
160 32 18.02 18.7 18.82 19 1.2 3.95 55 -2.88 25
Maximum
160.1 33 18.8 19.0 19.4 1.5 4 -
50 dB Bandwidth Passband Variation Absolute Delay Ultimate Rejection Material Temperature coefficient Ambient Temperature Package Size
dB
KHz/°C °C
DIP3512 (35.0x12.8x4.7mm3)
Notes:
1. All specifications are based on the test circuit shown 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. This is the optimum impedance in order to achieve the performance show
Matching Configuration
INPUT 50Ω L1 L2
OUTPUT 50Ω
L1=15nH
L2=10nH
Source/Load Impedance=50 ohm
Notes - Component values may change depending on board layout.
SIPAT Co., Ltd.
( CETC No. 26 Research Institute ) Nanping Huayuan Road No. 14 Chongqing, China, 400060
Part Number Rev. Date Rev.
LBT16037 2006-5-26 1.0 Page 1/3
Phone: +86-23-62808818
Fax: +86-23-62805284
www.sipatsaw.com /
[email protected]
China Electronics Technology Group Corporatio...