200W mono bridge PWM amplifier
TDA7572
200W mono bridge PWM amplifier with built-in step-up converter
Preliminary Data
Features
■ Input stage and gain...
Description
TDA7572
200W mono bridge PWM amplifier with built-in step-up converter
Preliminary Data
Features
■ Input stage and gain compressor www.DataSheet4U.com ■ Over-modulation protection and current limiting ■ ■ ■ ■ ■ ■
Modulator DAC Step-up Mode control Diagnostics / safety Power control Broad operating voltage is supported, allowing operation from both 14V and 42V automotive power buses, as well as from split supplies for consumer electronics use. A current mode control boost converter controller is provided to allow high power operation in a 14V environment. Turn-on and turn-off transients are minimized by soft muting/unmuting and careful control of offsets within the IC. Digital Audio input is supported by an integrated one channel DAC. Sophisticated diagnostics and protection provide fault reporting via I2C and power shutdown for safety related faults. TDA7572 is packaged in a HiQUAD-64 package.
HiQUAD-64
Description
TDA7572 is a highly integrated, highly versatile, semi-custom IC switch mode audio amplifier. It integrates audio signal processing and power amplification tailored for standalone remote bass box applications, while providing versatility for full bandwidth operation in either automotive or consumer audio environments. It's configured as one full bridge channel, using two clocked PWM modulators driving external, complementary FET's. Table 1. Device summary
Order code TDA7572
Package HiQUAD-64
Packing Tray
September 2007
Rev 1
1/64
www.st.com 1
This is preli...
Similar Datasheet