VMIVME-4905

This product is not recommended for new designs. This specification is not being maintained. Some options may no longer be available and some information may be obsolete. VMIVME-4905 High Power Digital-to-Synchro/Resolver Converter Board 14-bit converter with an accuracy as high as ±1 arc minute (±4 arc minutes is standard) 3- or 4-wire output for driving synchros or resolvers Internal transformers (400 Hz options) Front panel fail LED Amp D-type (no. 206584-1) 5 VA, 2 VA (transformer output), or 0.024 VA options Nonprivileged or supervisory short I/O Supports off-line and on-line fault detection and isolation Compatible with Intelligent I/O Controllers DESCRIPTION — The VMIVME-4905, a digital-to-synchro or resolver converter (DSC/DRC) board, utilizes the NATEL-HSDR 2514 converter module. It www.DataSheet4U.com supports a wide variety of options which are supported by configuring jumpers on the basic printed circuit board and by installing optional parts (see the Ordering Options). The VMIVME-4905 board, with supported Built-in-Test VMIC hardware, features both offline and online fault detection and isolation. The Built-in-Test features require a VMIC quad-channel synchro-to-digital converter (SDC) board (VMIVME-4911) or a single channel SDC board (VMIVME-4910) and a standard synchro test backplane (SRTbus™) installed in the P2 position of a standard VME chassis (refer to VMIC’s Synchro/Resolver (Built-in-Test) Subsystem Configuration Guide, Document No. 825-...