1.8V Operational Amplifier
LMV791/LMV792 17 MHz, Low Noise, CMOS Input, 1.8V Operational Amplifiers
November 2005
LMV791/LMV792 17 MHz, Low Noise...
Description
LMV791/LMV792 17 MHz, Low Noise, CMOS Input, 1.8V Operational Amplifiers
November 2005
LMV791/LMV792 17 MHz, Low Noise, CMOS Input, 1.8V Operational Amplifiers
General Description
The LMV791 (Single) and the LMV792 (Dual) low noise, CMOS input operational amplifiers offer a low input voltage while consuming only 1.15 mA noise density of 5.8 nV/ (LMV791) of quiescent current. The LMV791 and LMV792 are unity gain stable op amps and have gain bandwidth of 17 www.DataSheet4U.com MHz. The LMV791/ LMV792 have a supply voltage range of 1.8V to 5.5V and can operate from a single supply. The LMV791/LMV792 each feature a rail-to-rail output stage capable of driving a 600Ω load and sourcing as much as 60 mA of current. The LMV791 family provides optimal performance in low voltage and low noise systems. A CMOS input stage, with typical input bias currents in the range of a few femtoAmperes, and an input common mode voltage range which includes ground make the LMV791 and the LMV792 ideal for low power sensor applications. The LMV791 family has a built-in enable feature which can be used to optimize power dissipation in low power applications. The LMV791/LMV792 are manufactured using National’s advanced VIP50 process and are offered in a 6-pin TSOT23 and a 10-pin MSOP package respectively.
Features
(Typical 5V supply, unless otherwise noted) n Input referred voltage noise 5.8 nV/ n Input bias current 100 fA n Unity gain bandwidth 17 MHz n Supply current per channel — LMV791 1.15 mA — LM...
Similar Datasheet