Photomicrosensor
Photomicrosensor (Transmissive)
EE-SX1042
Be sure to read Precautions on page 25.
■ Dimensions
Note: All units are in m...
Description
Photomicrosensor (Transmissive)
EE-SX1042
Be sure to read Precautions on page 25.
■ Dimensions
Note: All units are in millimeters unless otherwise indicated.
Four, C0.3
■ Features
14.5-mm-tall model with a deep slot. PCB mounting type. High resolution with a 0.5-mm-wide aperture.
■ Absolute Maximum Ratings (Ta = 25°C)
0.5±0.05
14.5 12±0.4
Four, 0.25
(11.2)
5 min.
(1.92) Cross section AA
Internal Circuit
KC
Unless otherwise specified, the tolerances are as shown below.
AE
Terminal No. Name A Anode K Cathode C Collector E Emitter
Dimensions 3 mm max.
3 < mm ≤ 6 6 < mm ≤ 10 10 < mm ≤ 18 18 < mm ≤ 30
Tolerance
±0.3 ±0.375 ±0.45 ±0.55 ±0.65
Emitter
Item Forward current
Pulse forward current
Reverse voltage
Detector
Collector–Emitter voltage
Emitter–Collector voltage
Collector current
Collector dissipation
Ambient tem- Operating
perature
Storage
Soldering temperature
Symbol IF
IFP
VR VCEO
Rated value 50 mA (see note 1) 1A (see note 2) 4V
30 V
VECO
---
IC PC
Topr Tstg Tsol
20 mA
100 mW (see note 1) –25°C to 85°C –30°C to 100°C 260°C (see note 3)
Note: 1. Refer to the temperature rating chart if the ambient temperature exceeds 25°C.
2. The pulse width is 10 μs maximum with a frequency of 100 Hz.
3. Complete soldering within 10 seconds.
■ Electrical and Optical Characteristics (Ta = 25°C)
Emitter Detector
Rising time Falling time
Item Forward voltage
Reverse current
Peak emission wavelength
Light current
Dark current
Leakage current
Collector–...
Similar Datasheet