AT91SAM9260

SAM9260 Atmel | SMART ARM-based Embedded MPU DATASHEET Description The Atmel® | SMART SAM9260 eMPU is based on the integration of an ARM926EJ-S™ processor with fast ROM and RAM memories and a wide range of peripherals. The SAM9260 embeds an Ethernet MAC, one USB Device Port, and a USB Host controller. It also integrates several standard peripherals, such as the USART, SPI, TWI, Timer Counters, Synchronous Serial Controller, ADC and MultiMedia Card Interface. The SAM9260 is architectured on a 6-layer matrix, allowing a maximum internal bandwidth of six 32-bit buses. It also features an External Bus Interface capable of interfacing with a wide range of memory devices. Atmel-6221M-ATARM-SAM9260-Datasheet_13-Jan-16 Features  180 MHz ARM926EJ-S™ ARM® Thumb® Processor ̶ 8 Kbytes Data Cache, 8 Kbytes Instruction Cache, MMU  Memories ̶ 32-bit External Bus Interface supporting 4-bank SDRAM/LPSDR, Static Memories, CompactFlash, SLC NAND Flash with ECC ̶ Two 4-Kbyte internal SRAM, single-cycle access at system speed ̶ One 32-Kbyte internal ROM, embedding bootstrap routine  Peripherals ̶ ITU-R BT. 601/656 Image Sensor Interface (ISI) ̶ USB Device and USB Host with dedicated On-Chip Transceiver ̶ 10/100 Mbps Ethernet MAC Controller (EMAC) ̶ One High Speed Memory Card Host ̶ Two Master/Slave Serial Peripheral Interfaces (SPI) ̶ Two 3-channel 32-bit Timer/Counters (TC) ̶ One Synchronous Serial Controller (SSC) ̶ One Two-wire Interface (TWI) ̶ Four USARTs ̶ Two UARTs ̶ 4-channel 10-bit A...