LC96

Data Sheet High Power 980nm Pump Laser Module Grating Stabilized, 600mW LC96 www.DataSheet4U.com These lasers are designed as pump sources for erbium doped fiber amplifier (EDFA) applications. Processes and techniques of coupling the fiber to the laser allow high output powers that are very stable with both time and temperature. The grating is located in the pigtail to stabilize the wavelength. Devices are available with kink free output powers to 600mW. The LC96 series pump module utilises a double Fiber Bragg Grating design for enhanced wavelength and power stability performance. This product has been designed to ensure superior wavelength locking over drive current, temperature and optical feedback changes. Features: Double Fiber Bragg Grating wavelength stabilization High output power, up to 600mW kink free Polarization maintaining fiber pigtail Internal thermoelectric heatpump and monitor photodiode Hermetically sealed 14 pin butterfly package Telcordia GR-468-CORE compliant Field proven high reliability RoHS compliant Applications: Low noise erbium doped fiber amplifiers (EDFAs) Dense wavelength division multiplexing (DWDM) EDFAs CATV Applications 1 Data Sheet Characteristics Conditions unless otherwise stated: www.DataSheet4U.com Case temperature -20 to +75°C Submount temperature 25°C Monitor diode bias -5V CW operation Kink-free fiber-coupled output power LC96*74-20R – 974nm LC96*76-20R – 976nm LC96A7*-20R 400mW LC96B7*-20R 410mW LC96C7...