Preliminary Data Sheet I0174J rev. A 06/05
IR0530CSP
FlipKYTM 0.5 Amp 30 Volt
www.DataSheet4U.com
Features • Ultra Lo...
Preliminary Data Sheet I0174J rev. A 06/05
IR0530CSP
FlipKYTM 0.5 Amp 30 Volt
www.DataSheet4U.com
Features Ultra Low VF To Footprint Area
Very Low Profile (<0.6mm) Low Thermal Resistance Supplied Tested And On Tape & Reel
Applications Reverse Polarity Protection
Current Steering Freewheeling Flyback Oring FlipKYTM
Major Ratings and Characteristics Characteristics
IF(AV) Rectangular waveform VRRM IFSM @ tp = 5 µs sine VF TJ @ 0.5 Apk, TJ=125°C range
IR0530CSP
0.5 30 190 0.33 - 55 to 150
Units
A V A V °C
Description
International Rectifier's FlipKY product family utilizes wafer level chip scale packaging to deliver
Schottky diodes with the lowest VF to PCB footprint area in industry. The three pad 0.9mm x 1.2mm devices can deliver up to 0.5A and occupy only 1.08mm2 of board space. The anode and cathode connections are made through solder bump pads on one side of the silicon rather than through protruding leads enabling designers to strategically place the diodes on the PCB. This design not only minimizes board space but also reduces thermal resistance and inductance, which can improve overall circuit efficiency. Typical applications include hand-held, portable equipment such as cell phones, MP3 players, PDAs, and portable hard disk drives where space savings and performance are crucial.
www.irf.com
1
IR0530CSP
Preliminary Data Sheet I0174J rev. A 06/05
Voltage Ratings
Part number
VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltag...