Independent Clock Quad HOTLink Transceiver
CYV15G0404DXB
Independent Clock Quad HOTLink II™ Transceiver with Reclocker
Features
■ Quad channel transceiver for 195...
Description
CYV15G0404DXB
Independent Clock Quad HOTLink II™ Transceiver with Reclocker
Features
■ Quad channel transceiver for 195 to 1500 MBaud serial signaling rate ❐ Aggregate throughput of up to 12 Gbits/second
■ Second-generation HOTLink® technology
■ Compliant to multiple standards ❐ SMPTE-292M, SMPTE-259M, DVB-ASI, Fibre Channel, ESCON, and Gigabit Ethernet (IEEE802.3z) ❐ 10 bit uncoded data or 8B/10B coded data
■ Truly independent channels ❐ Each channel is able to: Perform reclocker function Operate at a different signaling rate Transport a different data format
■ Internal phase-locked loops (PLLs) with no external PLL components
■ Selectable differential PECL compatible serial inputs per channel ❐ Internal DC restoration
■ Redundant differential PECL compatible serial outputs per channel
❐ No external bias resistors required ❐ Signaling rate controlled edge rates ❐ Source matched for 50 transmission lines
■ MultiFrame™ Receive Framer provides alignment options ❐ Comma or full K28.5 detect ❐ Single or multibyte Framer for byte alignment ❐ Low latency option
■ Selectable input and output clocking options
■ Synchronous LVTTL parallel interface
■ JTAG boundary scan
■ Built In Self Test (BIST) for at-speed link testing
■ Link quality indicator by channel ❐ Analog signal detect ❐ Digital signal detect
■ Low power 3W at 3.3V typical
■ Single 3.3V supply
■ 256 ball thermally enhanced BGA
■ 0.25 BiCMOS technology
■ JTAG device ID ‘0C811069’x
Cypress Semiconductor Corporation...
Similar Datasheet