MBM29DL32BF
FUJITSU SEMICONDUCTOR DATA SHEET
DS05-20904-3E
FLASH MEMORY
CMOS
32 M (4 M × 8/2 M × 16) BIT Dual Operation
www.DataS...
Description
FUJITSU SEMICONDUCTOR DATA SHEET
DS05-20904-3E
FLASH MEMORY
CMOS
32 M (4 M × 8/2 M × 16) BIT Dual Operation
www.DataSheet4U.com
MBM29DL32TF/BF-70
s DESCRIPTION
The MBM29DL32TF/BF are a 32 M-bit, 3.0 V-only Flash memory organized as 4 M bytes of 8 bits each or 2 M words of 16 bits each. These devices are designed to be programmed in-system with the standard system 3.0 V VCC supply. 12.0 V VPP and 5.0 V VCC are not required for write or erase operations. The devices can also be reprogrammed in standard EPROM programmers. (Continued)
s PRODUCT LINE UP
Part No. Power Supply Voltage (V) Max Access Time (ns) Max CE Access Time (ns) Max OE Access Time (ns) MBM29DL32TF/BF 70 VCC = 3.0 V 70 70 30
+0.6 V −0.3 V
s PACKAGES
48-pin plastic TSOP (1)
Marking side
48-ball plastic FBGA
(FPT-48P-M19)
(BGA-48P-M12)
MBM29DL32TF/BF-70
)
(Continued)
MBM29DL32TF/BF are organized into four physical banks; Bank A, Bank B, Bank C and Bank D, which are considered to be four separate memory arrays operations. It is the Fujitsu’s standard 3.0 V only Flash memories, with the additional capability of allowing a normal non-delayed read access from a non-busy bank of the array while an embedded write (either a program or an erase) operation is simultaneously taking place on the other bank. In the device, a new design concept called FlexBankTM *1 Architecture is implemented. Using this concept the device can execute simultaneous operation between Bank 1, a bank chosen from among the four banks, and...
Similar Datasheet