Document
Datasheet, V2.10a, 25 Mar 2014
CoolSET™-F2
ICE2A0565/165/265/365 ICE2B0565/165/265/365 ICE2A0565G ICE2A0565Z ICE2A180Z/280Z ICE2A765I/2B765I ICE2A765P2/2B765P2 ICE2A380P2
Off-Line SMPS Current Mode Controller with integrated 650V/ 800V CoolMOS™
PMM Power Management &Multimarket
CoolSET™-F2
Revision History:
2014-3-25
Previous Version: 2.10
Page
Subjects (major changes since last revision)
4, 22, 24
revised typo
Datasheet
For questions on technology, delivery and prices please contact the Infineon Technologies Offices in Germany or the Infineon Technologies Companies and Representatives worldwide: see our webpage at http:// www.infineon.com.
CoolMOS™, CoolSET™ are trademarks of Infineon Technologies AG.
Edition 2014-3-25
Published by Infineon Technologies AG, 81726 Munich, Germany,
© 2014 Infineon Technologies AG.
All Rights Reserved.
Legal disclaimer
The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party.
Information
For further information on technology, delivery terms and conditions and prices, please contact your nearest Infineon Technologies Office (www.infineon.com).
Warnings
Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact your nearest Infineon Technologies Office. Infineon Technologies Components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.
CoolSET™-F2
Off-Line SMPS Current Mode Controller with integrated 650V/800V CoolMOS™
Product Highlights
• Best in class in DIP8, DIP7, TO220 and DSO16/12 packages
• No heat-sink required for DIP8, DIP7 and DSO16/12 • Increased creepage distance for TO220, DIP7 and
DSO16/12 • Isolated drain for TO220 packages • Lowest standby power dissipation • Enhanced protection functions with
Auto Restart Mode • Pb-free plating, halogen free mold compound
PG-DIP-7-1 P-DIP-7-1
PG-DIP-8
P-DIP-8-4, -6
PPG-TO-T22O0-62-4260-6-46
PG-TO220-6-47
P-TO220-6-47
PG-DSO-16/12
Features
• 650V/800V avalanche rugged CoolMOS™ • Only few external components required • Input Vcc Undervoltage Lockout • 67kHz/100kHz switching frequency • Max duty cycle 72% • Low Power Standby Mode to meet
European Commission Requirements • Thermal Shut Down with Auto Restart • Overload and Open Loop Protection • Overvoltage Protection during Auto Restart • Adjustable Peak Current Limitation via
external resistor • Overall tolerance of Current Limiting < ±5% • Internal Leading Edge Blanking • User defined Soft Start • Soft driving for low EMI
Description
The second generation CoolSET™-F2 provides several special enhancements to satisfy the needs for low power standby and protection features. In standby mode frequency reduction is used to lower the power consumption and support a stable output voltage in this mode. The frequency reduction is limited to 20kHz/21.5 kHz to avoid audible noise. In case of failure modes like open loop, overvoltage or overload due to short circuit the device switches in Auto Restart Mode which is controlled by the internal protection unit. By means of the internal precise peak current limitation, the dimension of the transformer and the secondary diode can be sized lower which leads to more cost effective for the overall system.
Typical Application
85 ... 270 VAC
R
Start-up
Snubber
VCC
Low Power
Power
StandBy Management
C
VCC
Drain
CoolMOS™
Feedback
SoftS C
Soft Start
Soft-Start Control
PWM Controller Current Mode
Precise Low Tolerance Peak Current Limitation
FB Feedback
PWM-Controller
CoolSET™-F2
Protection Unit
Isense
GND
R
Sense
+
Converter DC Output
-
Version 2.10a
3
25 Mar 2014
CoolSET™-F2
Overview
Type
ICE2A0565
Package
PG-DIP-8
VDS
650V
FOSC
100kHz
RDSon1)
4.7
230VAC ±15%2)
23W
ICE2A165
PG-DIP-8
650V
100kHz
3.0
31W
ICE2A265
PG-DIP-8
650V
100kHz
0.9
52W
ICE2A365
PG-DIP-8
650V
100kHz
0.45
67W
ICE2B0565 PG-DIP-8
650V
67kHz
4.7
23W
ICE2B165
PG-DIP-8
650V
67kHz
3.0
31W
ICE2B265
PG-DIP-8
650V
67kHz
0.9
52W
ICE2B365
PG-DIP-8
650V
67kHz
0.45
67W
ICE2A0565Z PG-DIP-7-1
650V
100kHz
4.7
23W
ICE2A180Z PG-.