www.DataSheet4U.com
PJ7800B Series 3-Terminal Fixed Voltage Positive Regulators
With adequate heatsinking they can deli...
www.DataSheet4U.com
PJ7800B Series 3-Terminal Fixed Voltage Positive
Regulators
With adequate heatsinking they can deliver output currents up to 1 ampere. Although designed primarily as a fixed voltage
regulator, these devices can be used with external components to obtain adjustable voltages and currents.
T
hese voltage
regulators are monolithic integrated circuits designed as fixed-voltage
regulators for a wide
variety of applications including local, on-card regulation. These
regulators employ internal current limiting, thermal shutdown, and safe-area compensation.
FEATURES
Output Current up to 1 Ampere No External Components Required Internal Thermal Overload Protection Internal Short-Circuit Current Limiting Output
Transistor Safe-Area Compensation Output Voltage Offered in 4% Tolerance
PIN ARRANGEMENT
TO-220 TO-220F
Pin: 1.Input 2.Ground 3.Output (Heatsink surface connected to Pin 2.)
CIRCUIT SCHEMATIC
ORDERING INFORMATION
Device Operating Temperature
0°C ~ +70°C
Package TO-220 TO-220F
Representative Schematic Diagram
PJ78xxCZ PJ78xxCI
Standard Application
A common ground is required between the input and the output voltages. The input voltage must remain typically 2.0V above the output voltage even during the low point on the Input ripple voltage. XX = these two digits of the type number indicate voltage. * = Cin is required if
regulator is located an appreciable distance from power supply filter. ** = Co is not needed for stability; however, ...