(ML145050 / ML145051) 10-Bit A/D Converter
www.DataSheet4U.com
ML145050 ML145051
10-Bit A/D Converter with Serial Interface - CMOS
Legacy Device: Motorola MC1450...
Description
www.DataSheet4U.com
ML145050 ML145051
10-Bit A/D Converter with Serial Interface - CMOS
Legacy Device: Motorola MC145050, MC145051 These ratio metric 10-bit ADCs have serial interface ports to provide communication with MCUs and MPUs. Either a 10- or 16-bit format can be used. The 16-bit format can be one continuous 16-bit stream or two intermittent 8-bit streams. The converters operate from a single power supply with no external trimming required. Reference voltages down to 4.0 V are accommodated. The ML145050 has the same pin out as the 8-bit ML145040 which allows an external clock (ADCLK) to operate the dynamic A/D conversion sequence. The ML145051 has the same pin out as the 8-bit ML145041 which has an internal clock oscillator and an end-of-conversion (EOC) output. 11 Analog Input Channels with Internal Sample-and-Hold Operating Temperature Range: – 40 to 125°C Successive Approximation Conversion Time: ML145050 – 21 µs (with 2.1 MHz ADCLK) ML145051 – 44 µs Maximum Maximum Sample Rate: ML145050 – 38 ks/s ML145051 – 20.4 ks/s Analog Input Range with 5-Volt Supply: 0 to 5 V Monotonic with No Missing Codes Direct Interface to Motorola SPI and National MICROWIRE Serial Data Ports Digital Inputs/Outputs are TTL, NMOS, and CMOS Compatible Low Power Consumption: 14 mW Chip Complexity: 1630 Elements (FETs, Capacitors, etc.) See Application Note AN1062 for Operation with QSPI
P DIP 20 = RP PLASTIC CASE 738
SO 20W = -6P SOG CASE 751D
CROSS REFERENCE/ORDERI...
Similar Datasheet