DatasheetsPDF.com

STA15KxxP Dataheets PDF



Part Number STA15KxxP
Manufacturers SSDI
Logo SSDI
Description (STA15KxxP) 15000 WATTS PEAK PULSE POWER 7.5 - 100 VOLTS UNIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSOR
Datasheet STA15KxxP DatasheetSTA15KxxP Datasheet (PDF)

www.DataSheet4U.com Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com STA15K7.5P thru STA15K100P 15,000 WATTS PEAK PULSE POWER 7.5 – 100 VOLTS UNIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSOR Designer’s Data Sheet • • • • • • • • • FEATURES: 7.50-100 Volt Unidirectional Smaller than 704-15K35 and 704-15K36T types Hermetically Sealed Meets all environmental requirements of MIL-PRF-19500 Custom Co.

  STA15KxxP   STA15KxxP


Document
www.DataSheet4U.com Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com STA15K7.5P thru STA15K100P 15,000 WATTS PEAK PULSE POWER 7.5 – 100 VOLTS UNIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSOR Designer’s Data Sheet • • • • • • • • • FEATURES: 7.50-100 Volt Unidirectional Smaller than 704-15K35 and 704-15K36T types Hermetically Sealed Meets all environmental requirements of MIL-PRF-19500 Custom Configurations Available TX and TXV Screening Available APPLICATIONS: Protection of Voltage Sensitive Components Protection Against Power Interruption Lightning Protection Maximum Ratings Stand Off Voltage Steady State Power Dissipation Peak Pulse Power @ 1.0 msec Peak Pulse Power and Steady State Power Derating Peak Pulse Power and Pulse Width Operating and Storage Temperature VRWM PD PPP 5.6-75 100 15,000 Volts Watts Watts SEE GRAPH SEE GRAPH -65 °C to +175°C Note: SSDI Transient Suppressors offer standard Breakdown Voltage Tolerances of + 10% (A) and + 5% (B). For other Voltage and Voltage Tolerances, contact SSDI's Marketing Department PEAK PULSE POWER VS. TEMPERATURE DERATING CURVE PEAK PULSE POWER (% Rated 25°C Power) Package shown is standard configuration. SSDI can custom design your module with terminals that meet your unique design criteria. Additionally, SSDI can package these devices with an irregular footprint or offset mounting positions. This data sheet is meant to serve as an example of SSDI's Transient Protection Module Capabilities. For custom configurations, please contact SSDI's Marketing Department. AMBIENT TEMPERATURE (°C) NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: T00006C DOC www.DataSheet4U.com Solid State Devices, Inc. 14701 Firestone Blvd, La Mirada, Ca 90638 Phone: (562) 404-4474 Fax: (562) 404-1773 [email protected] www.ssdi-power.com STA15K7.5P thru STA15K100P Peak Pulse Clamping Voltage (Max) @ Current Tp=1ms (note 4) Maximum Continuous Current (note 4) Dynamic Impedance (note 2) ZBR @IBRT Max Temperat ure Coefficient ELECTRICAL CHARACTERISTICS Break Down (note 1) Part Number (note 5) Nominal Voltage Test Current Max Reverse Stand Off Voltage VRWM Volts 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 Reverse Leakage Current VBR Volts STA15K7.5P STA15K8.2P STA15K9.1P STA15K10P STA15K11P STA15K12P STA15K13P STA15K15P STA15K16P STA15K18P STA15K20P STA15K22P STA15K24P STA15K27P STA15K30P STA15K33P STA15K36P STA15K39P STA15K43P STA15K47P STA15K51P STA15K56P STA15K62P STA15K68P STA15K75P STA15K82P STA15K91P STA15K100P 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91 100 @IBRT Amps 1.75 1.50 1.50 1.25 1.25 1.00 1.00 0.75 0.75 0.65 0.65 0.50 0.50 0.50 0.40 0.40 0.30 0.30 0.30 0.25 0.25 0.20 0.20 0.20 0.20 0.15 0.15 0.15 IR @VRWM mA 15.0 12.0 0.40 0.20 0.15 0.10 0.04 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 VC Volts 11.7 12.5 13.8 15.0 16.2 17.3 19.0 22.0 23.5 26.5 29.0 31.9 34.7 38.5 42.9 46.9 50.0 55.6 60.0 65.2 71.4 78.9 88.2 93.7 107.1 115.4 125.0 136.4 IPP Amps 1280 1200 1090 1000 930 870 790 680 640 570 520 470 430 390 350 320 300 270 250 230 210 190 170 160 140 130 120 110 IRM Amps 12.5 11.5 10.2 9.5 8.6 7.7 7.0 6.0 5.5 5.0 4.4 3.9 3.6 3.1 2.8 2.6 2.4 2.1 1.8 1.75 1.7 1.6 1.5 1.3 1.2 1.1 1.0 .9 TC %/°C .03 .03 .03 .05 .05 .05 .05 .05 .06 .06 .06 .06 .06 .06 .06 .06 .06 .06 .06 .07 .07 .07 .07 .08 .08 .08 .08 .09 Ohms 0.07 0.08 0.09 0.10 0.11 0.11 0.12 0.12 0.13 0.13 0.15 0.16 0.18 0.25 0.40 0.50 0.60 0.70 1.0 1.2 1.4 1.8 2.0 2.2 2.5 3.0 4.0 4.5 PEAK PULSE POWER VS. PULSE WIDTH CURRENT PULSE WAVEFORM STEADY STATE POWER DERATING (% of 25 °C Rated Power) CASE TEMPERATURE ( ° C) % PEAK VALUE PEAK PULSE POWER (kW) PULSE WIDTH For optional high reliability screening or higher zener voltages, consult SSDI MARKETING Department. Notes: 1. All voltages are measured with automated test set using 35 msec test time. Longer or shorter test times will have a corresponding effect on the measured value due to heating effects. 2. Dynamic impedance is derived from the AC voltage divided by the AC current with RMS value of 10% of DC test current superimposed on the test current. 3. Ratings based on 25° C case temperature. 4. Pulse width (tp) is delined as the time from rated peak pulse current IPP to the point where peak pulse current decayed to 50% of rated IPP. (10ms X 1000ms waveform as defined by R.E.A.) 5. Part Number- For 5% Voltage Tolerance, sp ecify “B” in place of “A” STEADY STATE POWER .


STA15K22P STA15KxxP VCC1-B3A-125M00


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)