CM2545X171R-00

www.DataSheet4U.com 2 Line Ferrite Common Mode Power Chokes Steward’s common mode power/data filter products provide the most economi cal EMI filtering available for common mode noise. They provide EMI suppres sion for conductors such as power traces (tracks), and for high speed input/ output circuitry (including network and storage subsystems). They exhibit high frequency impedance essentially independent of DC bias current. COMMON MODE Features: Protected by one or more of the following US Patents: 5,455,552 and 5,568,111 ·High current capability (10 amps continuous operation) ·Up to 170 ohms impedance @100MHz or 300 ohms @1GHz ·Parts available in both thru-hole (B) and surface mount (R) versions ·Parts available in broad band and high frequency materials ·Economical common mode EMI filtering ·Compact size Applications: ·Filtering DC power on PC boards, especially in applications of greater than 3.0 amperes ·Filtering common mode EMI on high speed differential lines such as network and SCSI subsystems ·Cost sensitive designs ·Applications where low DCR is needed Part & Test Specifications: ·Maximum current ratings (I MAX) are determined by testing to a maximum temperature rise of 40oC with continuous operating current ·Board level components are rated up to a maximum of 75 volts ·Part performance is shown with curves for Common, Open and Normal Mode Impedances measured along two conductors. Common Mode Impedance is the impedance of EMI noise conducted in the same dir...