EN25B32

www.DataSheet4U.com EN25B32 EN25B32 32 Mbit Serial Flash Memory with Boot and Parameter Sectors FEATURES Single power supply operation - Full voltage range: 2.7-3.6 volt 32 M-bit Serial Flash - 32 M-bit/4096 K-byte/16384 pages - 256 bytes per programmable page High performance - 100MHz clock rate Low power consumption - 5 mA typical active current - 1 μA typical power down current Flexible Sector Architecture: - Two 4-Kbyte, one 8-Kbyte, one 16-Kbyte,one 32-Kbyte, and sixty three 64-Kbyte sectors Software and Hardware Write Protection: - Write Protect all or portion of memory via software - Enable/Disable protection with WP# pin High performance program/erase speed Byte program time: 7µs typical Page program time: 1.5ms typical Sector erase time: 300 to 800ms typical Chip erase time: 25 Seconds typical Lockable 512byte OTP security sector Minimum 100K endurance cycle Package Options 16 pins SOP 300mil body width 8 pins SOP 200mil body width 8 contact VDFN 8 pins PDIP All Pb-free packages are RoHS compliant Commercial and industrial temperature Range GENERAL DESCRIPTION The EN25B32 is a 32M-bit (4096K-byte) Serial Flash memory, with advanced write protection mechanisms, accessed by a high speed SPI-compatible bus. The memory can be programmed 1 to 256 bytes at a time, using the Page Program instruction. The EN25B32 has sixty eight sectors including sixty three sectors of 64KB, one sector of 32KB, one sector of 16KB, one sector of 8KB and two sectors ...