www.DataSheet4U.com
LT3472 Boost and Inverting DC/DC Converter for CCD Bias DESCRIPTIO
The LT®3472 dual channel switchi...
www.DataSheet4U.com
LT3472 Boost and Inverting DC/DC Converter for CCD Bias DESCRIPTIO
The LT®3472 dual channel switching
regulator generates positive and negative outputs for biasing CCD imagers. The device delivers up to –8V at 50mA and 15V at 20mA from a lithium-ion cell, providing bias for many popular CCD imagers. Switching at 1.1MHz, the LT3472 uses tiny, low profile capacitors and inductors and generates low noise outputs that are easy to filter.
Schottky diodes are internal and the output voltages are set with one resistor per channel, reducing external component count. The entire solution is less than 1mm profile and occupies just 50mm2. Internal sequencing circuitry disables the negative channel until the positive channel has reached 88% of its final value, ensuring that the sum of the two outputs is always positive. Separate soft-start capacitors for each output allow the ramp of each output to be independently controlled. The LT3472 is available in a low profile (0.75mm) 10-pin 3mm × 3mm DFN package.
FEATURES
■ ■ ■ ■ ■ ■ ■ ■ ■
Generates 15V at 20mA, –8V at 50mA from a Li-Ion Cell Internal
Schottky Diodes VIN Range: 2.2V to 16V Output Voltages Up to ±34V Capacitor-Programmable Soft-Start Sequencing: Positive Output Reaches 88% of Final Value Before Negative Output Begins Requires Only One Resistor to Set Output Voltage Constant Switching Frequency Ensures Low Noise Outputs Available in a 10-Lead (3mm × 3mm) DFN Package
U APPLICATIO S
■ ■ ■ ■
CCD Bias TFT LCD B...