DatasheetsPDF.com

MAX4008 Dataheets PDF



Part Number MAX4008
Manufacturers Maxim Integrated Products
Logo Maxim Integrated Products
Description (MAX4007 / MAX4008) High-Side Current Monitors
Datasheet MAX4008 DatasheetMAX4008 Datasheet (PDF)

www.DataSheet4U.com 19-2743; Rev 1; 5/03 High-Accuracy, 76V, High-Side Current Monitors in SOT23 General Description The MAX4007/MAX4008 precision, high-side, high-voltage current monitors are specifically designed for monitoring photodiode current in fiber applications. They offer a connection point for the reference current and a monitor output that produces a signal proportional to the reference current. The monitor output of the MAX4007 is a current proportional to the reference current. Th.

  MAX4008   MAX4008


Document
www.DataSheet4U.com 19-2743; Rev 1; 5/03 High-Accuracy, 76V, High-Side Current Monitors in SOT23 General Description The MAX4007/MAX4008 precision, high-side, high-voltage current monitors are specifically designed for monitoring photodiode current in fiber applications. They offer a connection point for the reference current and a monitor output that produces a signal proportional to the reference current. The monitor output of the MAX4007 is a current proportional to the reference current. The monitor output of the MAX4008 is a voltage proportional to the reference current. The current monitors have six decades of dynamic range and monitor reference currents of 250nA to 2.5mA with better than 5% accuracy. The photodiode current can be monitored from 10nA to 10mA with reduced accuracy. The MAX4007/MAX4008 accept a supply voltage of +2.7V to +76V, suitable for APD or PIN photodiode applications. Internal current limiting (20mA, typ) protects the devices against short circuit to ground. A clamp diode protects the monitor output from overvoltage. Additionally, these devices feature thermal shutdown if the die temperature reaches +150°C. The MAX4007/MAX4008 are available in tiny, spacesaving 6-pin SOT23 packages, and operate over the extended temperature range of -40°C to +85°C. Features o Wide Reference Current Dynamic Range Guaranteed 250nA to 2.5mA with 5% Monitor Accuracy Extended 10nA to 10mA with 10% Monitor Accuracy o Current (MAX4007) or Voltage (MAX4008) Monitor Outputs o Reference Current-Limit Protection (20mA, typ) o Voltage Clamp Protects Subsequent Output Circuitry o +2.7V to +76V Wide Voltage Range Operation o 6-Pin SOT23 Packages MAX4007/MAX4008 Ordering Information PART TEMP RANGE PIN-PACKAGE 6 SOT23-6 6 SOT23-6 TOP MARK ABNM ABNO Applications Photodiode Current-Monitoring Systems Portable Instrumentation Medical Instrumentation Laboratory Instrumentation Consumer Electronics Current-to-Voltage Conversion Level Translation MAX4007EUT-T -40°C to +85°C MAX4008EUT-T -40°C to +85°C Pin Configuration Selector Guide TOP VIEW CLAMP 1 6 BIAS PART MAX4007EUT-T MAX4008EUT-T PINPACKAGE 6 SOT23-6 6 SOT23-6 INTERNAL TYPICAL RESISTOR ACCURACY (%) None 10kΩ 5 1 GND 2 MAX4007 MAX4008 5 N.C. OUT 3 4 REF Typical Operating Circuit appears at end of data sheet. SOT23 ________________________________________________________________ Maxim Integrated Products 1 For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com. www.DataSheet4U.com High-Accuracy, 76V, High-Side Current Monitors in SOT23 MAX4007/MAX4008 ABSOLUTE MAXIMUM RATINGS CLAMP to GND ......................................................-0.3V to +80V BIAS, REF to GND ..................................................-0.3V to +80V OUT to GND .........................................-0.3V to (VCLAMP + 0.6V) Short Circuit, REF to GND ..........................................Continuous Current into Any Pin..........................................................±30mA Continuous Power Dissipation (TA = +70°C) 6-Pin SOT23 (derate 8.7mW/°C above +70°C)............696mW Operating Temperature Range ...........................-40°C to +85°C Junction Temperature ......................................................+150°C Storage Temperature Range .............................-65°C to +150°C Lead Temperature (soldering, 10s) .................................+300°C Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS (VBIAS = 40V, GND = 0V, REF = open, VOUT = 0V (MAX4007), CLAMP = open, -40°C to +85°C. Typical values are at TA = +25°C, unless otherwise noted.) (Note 1) PARAMETER Bias Voltage Range Bias Quiescent Current Reference Voltage Thermal Shutdown Engage Temperature Trip-Point Temperature Hysteresis Input Current Limit MAX4007 Output Current Noise SYMBOL VBIAS IBIAS VREF TSHDN THYS ILIM CONDITIONS Inferred from power-supply rejection test IREF = 250nA IREF = 2.5mA IREF = 2.5mA REF shorted to GND, junction temperature rising REF shorted to GND, junction temperature falling VREF = VBIAS - 5V f = 0.1Hz to 10Hz iNOUT MIN 2.7 TYP MAX 76 UNITS V µA mA V °C °C mA 90 3.6 VBIAS - 1.1 VBIAS - 0.8 150 5 20 IREF = 250nA IREF = 2.5mA IREF = 250nA IREF = 2.5mA IREF = 250nA IREF = 2.5mA IREF = 250nA IREF = 2.5mA IREF = 250nA IREF = 2.5mA 0.3 63 9.2 1240 0.041 0.63 1.3 12.5 50 5 10 1 0 to VBIAS - 1.5 0 to VBIAS - 0.85 0.6 200 4 pARMS f = 0.1Hz to 10kHz f = 0.1Hz to 10Hz MAX4008 Output Voltage Noise eNOUT f = 0.1Hz to 10kHz MAX4007 MAX4008 Output Leakage Output Voltage Range VOUT VOUT VCL.


MAX4007 MAX4008 UPD7210C


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)