Power Amplifier
www.DataSheet4U.com
AP1098
2.4~2.5 GHz Power Amplifier 2004.07.19 Preliminary
The AP1098 is a linear, low current powe...
Description
www.DataSheet4U.com
AP1098
2.4~2.5 GHz Power Amplifier 2004.07.19 Preliminary
The AP1098 is a linear, low current power amplifier in ISM band utilizing InGaP /GaAs HBT process. It features a LOW current of 85mA, small signal gain of 25 dB, linear power of 19dBm and PAE of 28% for 802.11g under 3.3V. It can also be adjusted to smaller current(~60mA) with lower linear power (~16dBm). The AP1098 is housed in a 3 x 3 (mm), 16-pin, and QFN leadless package. The AP1098 is suitable to be used in portable, low current 802.11b and 802.11g WLAN applications. Major Applications
IEEE 802.11b/g WLAN system WLAN Portable Devices WLAN USB Devices Bluetooth and other 2.4 GHz ISM Band Application
Ultra LOW Current (see below specs) Ultra High Efficiency: PAE>28% @802.11g linear power Gain: 25 dB Under Vc=3.3V, Vref=3V * 11g linear power: 19dBm current: 85mA * 11b linear power: 23dBm current: 165mA
Pin Details
Pin Number 1 2
Functional Block Diagram
NC 16 NC Vcc1 Vcc1
RF IN
GND
I F R
15 14 1 2
Input Match
e r P C
3 4 5 6 7
13 12 RF OUT 11 RF OUT
y r a n i m i l
Low Idle Current: 25mA Name Description RF_IN GND RF input. DC and RF ground. Vcc_Bias Supply voltage for bias circuit. Power detector output. 1st-stage control voltage 2nd-stage control voltage DC and RF ground. No contact (Connect to ground for better thermal dissipation.) RF output. Require external matching. The detail configuration can be found in Application Notes Supply voltage for first stage. Some bypa...
Similar Datasheet