DatasheetsPDF.com

PIC18C801 Dataheets PDF



Part Number PIC18C801
Manufacturers Microchip Technology
Logo Microchip Technology
Description High-Performance ROM-less Microcontrollers
Datasheet PIC18C801 DatasheetPIC18C801 Datasheet (PDF)

www.DataSheet4U.com PIC18C601/801 High-Performance ROM-less Microcontrollers with External Memory Bus High Performance RISC CPU: • C compiler optimized architecture instruction set • Linear program memory addressing up to 2 Mbytes • Linear data memory addressing to 4 Kbytes External Program Memory On-Chip Device Maximum Addressing (bytes) 256K 2M Maximum Single Word Instructions 128K 1M On-Chip RAM (bytes) Advanced Analog Features: • 10-bit Analog-to-Digital Converter module (A/D) with: - Fast.

  PIC18C801   PIC18C801



Document
www.DataSheet4U.com PIC18C601/801 High-Performance ROM-less Microcontrollers with External Memory Bus High Performance RISC CPU: • C compiler optimized architecture instruction set • Linear program memory addressing up to 2 Mbytes • Linear data memory addressing to 4 Kbytes External Program Memory On-Chip Device Maximum Addressing (bytes) 256K 2M Maximum Single Word Instructions 128K 1M On-Chip RAM (bytes) Advanced Analog Features: • 10-bit Analog-to-Digital Converter module (A/D) with: - Fast sampling rate - Conversion available during SLEEP - DNL = ±1 LSb, INL = ±1 LSb - Up to 12 channels available • Programmable Low Voltage Detection (LVD) module - Supports interrupt on Low Voltage Detection PIC18C601 PIC18C801 1.5K 1.5K Special Microcontroller Features: • Power-on Reset (POR), Power-up Timer (PWRT), and Oscillator Start-up Timer (OST) • Watchdog Timer (WDT) with its own on-chip RC oscillator • On-chip Boot RAM for boot loader application • 8-bit or 16-bit external memory interface modes • Up to two software programmable chip select signals (CS1 and CS2) • One programmable chip I/O select signal (CSIO) for memory mapped I/O expansion • Power saving SLEEP mode • Different oscillator options, including: - 4X Phase Lock Loop (of primary oscillator) - Secondary Oscillator (32 kHz) clock input • Up to 160 ns instruction cycle: - DC - 25 MHz clock input - 4 MHz - 6 MHz clock input with PLL active • 16-bit wide instructions, 8-bit wide data path • Priority levels for interrupts • 8 x 8 Single Cycle Hardware Multiplier Peripheral Features: • • • • • • • • • High current sink/source 25 mA/25 mA Up to 47 I/O pins with individual direction control Three external interrupt pins Timer0 module: 8-bit/16-bit timer/counter with 8-bit programmable prescaler Timer1 module: 16-bit timer/counter (time-base for CCP) Timer2 module: 8-bit timer/counter with 8-bit period register Timer3 module: 16-bit timer/counter Secondary oscillator clock option - Timer1/Timer3 Two Capture/Compare/PWM (CCP) modules CCP pins can be configured as: - Capture input: 16-bit, max. resolution 10 ns - Compare is 16-bit, max. resolution 160 ns (TCY) - PWM output: PWM resolution is 1- to 10-bit Max. PWM freq. @: 8-bit resolution = 99 kHz 10-bit resolution = 24.4 kHz Master Synchronous Serial Port (MSSP) with two modes of operation: - 3-wire SPI™ (Supports all 4 SPI modes) - I2C™ Master and Slave mode Addressable USART module: Supports Interrupt on Address bit CMOS Technology: • • • • • Low power, high speed CMOS technology Fully static design Wide operating voltage range (2.0V to 5.5V) Industrial and Extended temperature ranges Low power consumption • •  2001 Microchip Technology Inc. Advance Information DS39541A-page 1 www.DataSheet4U.com PIC18C601/801 Pin Diagrams 64-Pin TQFP RE2/AD10 RE3/AD11 RE4/AD12 RE5/AD13 RE6/AD14 RE7/AD15 RD0/AD0 VDD VSS RD1/AD1 RD2/AD2 RD3/AD3 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 RE1/AD9 RE0/AD8 RG0/ALE RG1/OE RG2/WRL RG3/WRH MCLR/.


PIC18C601 PIC18C801 PIC18C658


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)