User Guide
FX2N-4AD SPECIAL FUNCTION BLOCK
www.DataSheet4U.com
USER’S GUIDE
JY992D65201C
This manual contains text, diagrams and...
Description
FX2N-4AD SPECIAL FUNCTION BLOCK
www.DataSheet4U.com
USER’S GUIDE
JY992D65201C
This manual contains text, diagrams and explanations which will guide the reader in the correct installation and operation of the FX2N-4AD and should be read and understood before attempting to install or use the unit. Further information can be found in the FX SERIES PROGRAMMING MANUAL(ΙΙ ), FX 0N/FX 1N/FX2N/ FX2NC SERIES HARDWARE MANUAL.
Guidelines for the Safety of the User and Protection of the FX2N-4AD special function block.
This manual should be used by trained and competent personnel. The definition of such a person or persons is as follows: a) Any engineer using the product associated with this manual, should be of a competent nature, trained and qualified to the local and national standards. These engineers should be fully aware of all aspects of safety with regards to automated equipment. b) Any commissioning or service engineer must be of a competent nature, trained and qualified to the local and national standards. c) All operators of the completed equipment should be trained to use this product in a safe and coordinated manner in compliance to established safety practices. Note: The term ‘completed equipment’ refers to a third party constructed device which contains or uses the product associated with this manual.
Notes on the Symbols Used in this Manual
At various times throughout this manual certain symbols will be used to highlight points of information which are intended to en...
Similar Datasheet