Document
www.DataSheet4U.com
S5688B,S5688G,S5688J,S5688N
TOSHIBA Rectifier Silicon Diffused Type
S5688B, S5688G, S5688J, S5688N
General Purpose Rectifier Application
Unit: mm Average forward current: IF (AV) = 1.0 A Repetitive peak reverse voltage: VRRM = 100~1000 V
· ·
Maximum Ratings (Ta = 25°C)
Characteristic S5688B Repetitive peak reverse voltage S5688G S5688J S5688N Average forward current S5688B S5688G IFSM S5688J S5688N Tj Tstg IF (AV) VRRM Symbol Ratings 100 400 600 1000 1.0 45 (50 Hz) 49 (60 Hz) 30 (50 Hz) 33 (60 Hz) -40~150 -40~150 °C °C A A V Unit
Peak one cycle surge forward current (non repetitive)
JEDEC JEITA TOSHIBA
― ― 3-3F2A
Junction temperature Storage temperature range
Weight: 0.18 g (typ.)
Electrical Characteristics (Ta = 25°C)
Characteristic Peak forward voltage Repetitive peak reverse current Symbol VFM IRRM Test condition IFM = 1.0 A VRRM = rated Min ¾ ¾ Typ. ¾ ¾ Max 1.2 10 Unit V mA
Marking
Type code Lot No. Month (starting from alphabet A) Code B G Cathode mark Color: Silver Year (last number of the christian era.) J N Type S5688B S5688G S5688J S5688N
G
1
2003-02-17
www.DataSheet4U.com
S5688B,S5688G,S5688J,S5688N
iF - vF (A)
30 200
Ta (max) - IF (AV)
Instantaneous on-state current
10 5 3 150 Tj = 25°C
Maximum allowable ambient temperature Ta (max) (°C)
2.0 2.4 2.8 3.2
iF
160
120
1 0.5 0.3
80
40
0.1 0.4
0.8
1.2
1.6
0 0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
Instantaneous forward voltage
vF
(V)
Average forward current
IF (AV)
(A)
Surge forward current (non-repetitive) Transient thermal impedance rth (j-a) (°C/W)
50 1000 300 100 30 10 3 1 0.3 0.1 0.001 0.01 0.1
rth (j-a) - t
Tj = 25°C
(A) Surge forward current IFSM
40 60 Hz 30
10 mm
10 mm
20
S5688B S5688G
5 mm ´ 5 mm 5 mm 1 10 100 1000
10 50 Hz 0 1
S5688J S5688N
Time t
3 5 10 30 50 100
(s)
Number of cycles at 50 Hz and 60 Hz
2
2003-02-17
www.DataSheet4U.com
S5688B,S5688G,S5688J,S5688N
RESTRICTIONS ON PRODUCT USE
000707EAA
· TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. · The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equip.