Low EMI Spread Spectrum Multiplier Clock
www.DataSheet4U.com
ABE0125
Low EMI Spread Spectrum Multiplier Clock
FEATURES
• • • • • • • • Spread Spectrum clock wit...
Description
www.DataSheet4U.com
ABE0125
Low EMI Spread Spectrum Multiplier Clock
FEATURES
Spread Spectrum clock with frequency range of 33 ~ 90MHz. Output frequency 1X the input frequency. Less than 250 ps skew between outputs. Less than 100 ps cycle - cycle jitter. ± 0.50% Center Spread Modulation (+/-15% tolerance). TTL/CMOS compatible outputs. 3.3V operation. Available in 8-Pin 150mil SOIC.
PIN CONFIGURATION
FIN CLK2 CLK1 GND 1 8 CLK5 CLK4 VDD CLK3
ABE0125
2 3 4
7 6 5
FIN = 33 ~ 90 Mhz
DESCRIPTION
The ABE0125 is a Spread Spectrum Clock Generator designed for the purpose of reducing EMI in highspeed digital systems. The device is designed to operate from 33 ~ 90MHz and provides five low-skew outputs.
BLOCK DIAGRAM
CLK1 CLK2 FIN PLL SST 1X CLK3 CLK4 CLK5
30332 Esperanza., Rancho Santa Margarita, Ca 92688 Ph: 949-546-8000 Fax: 949-546-8001 www.Abracon.com 03/21/05 Page 1
www.DataSheet4U.com
ABE0125
Low EMI Spread Spectrum Multiplier Clock
PIN DESCRIPTIONS
Name
FIN CLK2 CLK1 GND CLK3 VDD CLK4 CLK5
Number
1 2 3 4 5 6 7 8
Type
I O O I O P O O
Description
Input Clock Frequency. ( 33 ~ 90MHz ) Buffered Clock Output. 1X the input frequency Buffered Clock Output. 1X the input frequency Ground. Buffered Clock Output. 1X the input frequency 3.3V Power Supply. Buffered Clock Output. 1X the input frequency Buffered Clock Output. 1X the input frequency ( FIN ). ( FIN ). ( FIN ). ( FIN ). ( FIN ).
ELECTRICAL SPECIFICATIONS
1. Absolute Maximum Ratings PARAMETERS
Supply ...
Similar Datasheet