PC410L0NIP

PC410L0NIP www.DataSheet4U.com PC410L0NIP s Features 1. High resistance to noise due to high common rejection voltage (CMR:MIN. 10kV/µs) 2. High speed response (tpLH, tpHL:MAX.75ns) 3. Isolation voltage between input and output (Viso (rms):3.75kV) 4. Mini-flat package High Speed Response, High CMR OPIC Photocoupler s Outline Dimensions 6 5 4 (Unit : mm) internal connection diagram 6 5 4 1.27±0.25 PC410L Anode mark 2.54±0.25 4.4±0.2 1 3 s Applications 1. Programmable controllers 2. Inverters 1 3 0.4 ±0.1 3.6±0.3 2.6±0.2 s Absolute Maximum Ratings Parameter Symbol Rating *1 Forward current IF 20 Reverse voltage VR 5 Power dissipation P 40 Supply voltage VCC 7 High level output voltage VOH 7 Low level output current IOL 50 *2 Collector power dissipation PC 85 *3 3.75 Viso (rms) Isolation voltage −40 to +85 Operating temperature Topr −40 to +125 Storage temperature Tstg *4 Soldering temperature Tsol 270 Input (Ta=25°C) Unit mA V mW V V mA mW kV °C °C °C +0.4 0.5− 0.2 0.1±0.1 +0.2 7.0− 0.7 6˚ 1 3 Anode Cathode 4 5 6 GND VO (Open collector) VCC Output ∗ “OPIC”(Optical IC) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and signalprocessing circuit integrated onto a single chip. *1 Refer to Fig.4 *2 Refer to Fig.5 *3 40 to 60%RH, AC for 1minute *4 For 10s Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP device...