MAX8677C

www.DataSheet4U.com 19-0781; Rev 0; 4/07 1.5A Dual-Input USB/AC Adapter Charger and Smart Power Selector General Description The MAX8677C is an integrated 1-cell Li+ charger and Smart Power Selector™ with dual (DC and USB) power inputs. It can operate with either separate inputs for USB and AC adapter power*, or from a single input that accepts both. All power switches for charging and switching the load between battery and external power are included on-chip. No external MOSFETs are required. The MAX8677C features a Smart Power Selector to make the best use of limited USB or adapter power. The battery charge current and input current limit are independently set up to 1.5A and 2A, respectively. Input power not used by the system charges the battery. USB input current can be set to 100mA or 500mA. Automatic input selection switches the system load from battery to external power. Other features include overvoltage protection (OVP), charge status and fault outputs, power-OK monitors, charge timer, and battery thermistor monitor. Additionally, on-chip thermal limiting reduces the battery charge rate to prevent overheating. The MAX8677C is available in a 4mm x 4mm, 24-pin TQFN-EP package. o No External MOSFETs Required o Common or Separate USB and Adapter Inputs o System Operates with Discharged or No Battery o Automatic Adapter/USB/Battery Switchover o Load Peaks Over Adapter Rating Are Supported by Battery o Input Overvoltage Protection to 16V o 40mΩ System-to-Battery Switch o ...