25-BIT CONFIGURABLE REGISTERED BUFFER
www.DataSheet4U.com
DATASHEET
28-BIT 1:2 REGISTERED BUFFER FOR DDR2
IDT74SSTUBH32865A
The IDT74SSTUBH32865A includes ...
Description
www.DataSheet4U.com
DATASHEET
28-BIT 1:2 REGISTERED BUFFER FOR DDR2
IDT74SSTUBH32865A
The IDT74SSTUBH32865A includes a parity checking function. The IDT74SSTUBH32865A accepts a parity bit from the memory controller at its input pin PARIN, compares it with the data received on the D-inputs and indicates whether a parity error has occurred on its open-drain PTYERR pin (active LOW).
Description
This 28-bit 1:2 registered buffer with parity is designed for 1.7V to 1.9V VDD operation. All clock and data inputs are compatible with the JEDEC standard for SSTL_18. The control inputs are LVCMOS. All outputs are 1.8 V CMOS drivers that have been optimized to drive the DDR2 DIMM load. The IDT74SSTUBH32865A operates from a differential clock (CLK and CLK). Data are registered at the crossing of CLK going high, and CLK going low. The device supports low-power standby operation. When the reset input (RESET) is low, the differential input receivers are disabled, and undriven (floating) data, clock and reference voltage (VREF) inputs are allowed. In addition, when RESET is low all registers are reset, and all outputs except PTYERR are forced low. The LVCMOS RESET input must always be held at a valid logic high or low level. To ensure defined outputs from the register before a stable clock has been supplied, RESET must be held in the low state during power up. In the DDR2 RDIMM application, RESET is specified to be completely asynchronous with respect to CLK and CLK. Therefore, no timing ...
Similar Datasheet