Document
www.DataSheet4U.com
RD74HV1G08
High–Voltage 2–input AND gate
REJ03D0888-0100 Rev.1.00 Feb 20, 2007
Description
The RD74HV1G08 has two–input AND gate in a 5 pin package. Supports the wide power supply voltage and can use it for the other use as a general–purpose driver.
Features
• • • • • • • The basic gate function is lined up as Renesas uni logic series. Supplied on emboss taping for high-speed automatic mounting. Wide supply voltage range : 4.5 to 30 V Operating temperature range : –40 to +85°C All inputs VIH (Min.) = 3.5 V, VIL (Max.) = 0.8 V (@VCC = 10 V to 30 V) Output current : IO short (Typ.) = ±70 mA (@VCC = 15 V) Ordering Information
Part Name RD74HV1G08VSE Package Type VSON-5 pin Package Code (Previous Code) PUSN0005KA-A (TNP-5DV) Package Abbreviation VS Taping Abbreviation (Quantity) E (3,000 pcs / Reel)
Outline and Article Indication
• RD74HV1G08
Marking
R 2
VSON-5
= Control code
These products designed for general and industrial use. It is not supported for special quality or reliability demanded use such as automotive or life support or something like that.
Rev.1.00 Feb 20, 2007 page 1 of 5
RD74HV1G08
Function Table
Inputs A L H L H H : High level L : Low level B L L H H Output Y L L L H
Pin Arrangement
IN B
1
5
VCC
IN A
2
GND
3
4
OUT Y
(Top view)
Absolute Maximum Ratings
Item Supply voltage range Input voltage range *1 Output voltage range *1, 2 Input clamp current Output clamp current Continuous output current Continuous current through VCC or GND Maximum power dissipation *3 at Ta = 25°C (in still air) Storage temperature Notes: Symbol VCC VI VO IIK IOK IO ICC or IGND PT Tstg Ratings 0 to 30 –0.5 to VCC + 0.5 –0.5 to VCC + 0.5 ±50 ±75 ±100 ±100 200 –65 to 150 Unit V V V mA mA mA mA mW °C Test Conditions
VI < 0 or VI > VCC VO < 0 or VO > VCC VO = 0 to VCC
The absolute maximum ratings are values which must not individually be exceeded, and furthermore no two of which may be realized at the same time. 1. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed. 2. This value is limited to 30 V maximum. 3. The maximum package power dissipation was calculated using a junction temperature of 150°C.
Rev.1.00 Feb 20, 2007 page 2 of 5
RD74HV1G08
Recommended Operating Conditions
Item Supply voltage range Input voltage range Input / Output voltage range Symbol VCC VI VI/O Min 4.5 0 0 — — — — — — — — 0 0 0 –40 Max 30 VCC VCC –2.5 –5 –10 –15 2.5 5 10 15 100 20 10 85 Unit V V V Conditions
IOH Output current IOL
mA
Input transition rise or fall rate Operating free-air temperature
∆t / ∆v Ta
ns / V °C
VCC = 10 V VCC = 15 V VCC = 25 V VCC = 30 V VCC = 10 V VCC = 15 V VCC = 25 V VCC = 30 V VCC < 5 V 15 V > VCC ≥ 5 V 30 V ≥ VCC ≥ 15 V
Note: Unused or floating inputs must be held high or low.
Electrical Characteristic
(Ta = –40 to 85°C)
Item Symbol VCC (V) * 10 15 25 30 105 15 25 30 10 15 25 30 10 15 25 30 15 15 VCC 10 15 25 30 10 30 VCC Min 3.5 3.5 3.5 3.5 — — — — 9.0 13.5 22.5 27.0 — — — — –46 46 — — — — — — — — Typ — — — — — — — — — — — — — — — — –70 70 — — — — — — — 2.5 Max — — — — 0.8 0.8 0.8 0.8 — — — — 1.0 1.5 2.5 3.0 –95 95 ±1 0.5 1.0 2.0 2.0 2 10 — Unit Test condition
VIH Input voltage VIL
V
VOH Output voltage VOL
V
Output current Input current
IOH short IOL short IIN
mA µA
IOH = –2.5 mA IOH = –5 mA IOH = –10 mA IOH = –15 mA IOL = 2.5 mA IOL = 5 mA IOL = 10 mA IOL = 15 mA VO = 0V VO = VCC VIN = VCC or GND
Quiescent supply current
ICC
µA
VIN = VCC or GND
Supply current Input capacitance
ISUPP CIN
mA pF
VCC = 10 V , VIN = 4.5 V VCC = 30 V , VIN = 4.5 V VIN = VCC or GND
Note: For conditions shown as Min or Max, use the appropriate values under recommended operating conditions.
Rev.1.00 Feb 20, 2007 page 3 of 5
RD74HV1G08
Switching Characteristics
(CL = 50 pF , tr = tf = 5 ns)
Item Symbol Vcc (V) 10 15 Propagation delay time tPLH tPHL 20 25 30 10 15 Output rise / fall time tTLH tTHL 20 25 30 Min 15 10 10 10 10 8 7 6 5 5 Ta = –40 to 85°C Typ Max — — — — — — — — — — 85 60 50 40 35 30 25 20 17 15 ns A or B Y ns A or B Y Unit FROM (Input) TO (Output)
Test Circuit
VCC
Pulse Generator Z out = 50 Ω
Input
Output RL = 10 MΩ
CL = 50 pF
Note: CL includes probe and jig capacitance.
• Waveforms
tr tf 5V
90 % Input 10 % tTLH 90 % Output 10 % t PLH 50 % 50 %
90 % 50 % 10 % tTHL 90 % 50 % 10 % t PHL
0V
VOH
VOL
Note: Input waveform : PRR = 1 MHz, duty cycle 50 %, tr ≤ 5 ns, tf ≤ 5 ns
Rev.1.00 Feb 20, 2007 page 4 of 5
RD74HV1G08
Package Dimensions
JEITA Package Code P-USON5-1.2x1.6-0.50 RENESAS Code PUSN0005KA-A Previous Code TNP-5D/TNP-5DV MASS[Typ.] 0.002g
D 1.0 ±0.1 5 4
L1
HE
E
1
3 c
Reference Dimension in Millimeters Symbol
( 0.1 )
( 0.1 )
e
b
D E A A1 A2 b b1 e Lp x y ZD c c1 HE L1
Min Nom Max 1.55 1.6 1.65 1.1 1.2 1.3 0.6
A
0.15
0.2 0.5
0.3
0.07 0.12 0.22 1.55 1.6 0.2 1.65
Rev.1.00 Feb 20, 2007 page 5 of 5
Sales Strategic Planning Div.
Nippon Bldg., 2-6-2, Ohte-machi, Chi.