MAX9235

www.DataSheet4U.com 19-0849; Rev 0; 7/07 10-Bit LVDS Serializer General Description The MAX9235 serializer transforms 10-bit-wide parallel LVCMOS/LVTTL data into a serial high-speed, low-voltage differential signaling (LVDS) data stream. The serializer typically pairs with deserializers like the MAX9206, which receives the serial output and transforms it back to 10-bit-wide parallel data. The MAX9235 transmits serial data at speeds up to 400Mbps over PCB traces or twisted-pair cables. Since the clock is recovered from the serial data stream, clock-to-data and data-to-data skew that would be present with a parallel bus are eliminated. The MAX9235 serializer requires no external components and no control signals and can lock to a 16MHz to 40MHz system clock. The serializer output is held in high impedance until the device is fully locked to the local system clock. The MAX9235 operates from a single +3.3V supply, is specified for operation from -40°C to +105°C, and is available in a 16-pin TQFN (3mm x 3mm) package. Features ♦ Stand-Alone Serializer (vs. SERDES) Ideal for Unidirectional Links ♦ Framing Bits for Deserializer Resync Allow Hot Insertion Without System Interruption ♦ LVDS Serial Output Rated for Point-to-Point Applications ♦ Wide Reference Clock Input Range 16MHz to 40MHz ♦ Low 31mA Supply Current ♦ 10-Bit Parallel LVCMOS/LVTTL Interface ♦ Up to 400Mbps Payload Data Rate ♦ Small 16-Pin TQFN (3mm x 3mm) Package MAX9235 Ordering Information PART MAX9235ETE+ PINPACK...