HD-LINX II Voltage Controlled Oscillator
www.DataSheet4U.com
GO1525 HD-LINX™II Voltage Controlled Oscillator
GO1525 Data Sheet Key Features • • • • • • generate...
Description
www.DataSheet4U.com
GO1525 HD-LINX™II Voltage Controlled Oscillator
GO1525 Data Sheet Key Features generates 1.485GHz or 1.485/1.001GHz signal for HD-LINX™II ICs low current consumption 50Ω output impedance operates from a single 2.5V supply 8 pin tape on reel Pb-free and RoHS Compliant 1.485GHz reference clock signal for the GS1560 and GS9060 deserializers, and for the GS1532 and GS9062 serializers. The control voltage range is from 1.0 volts to 1.5 volts and is derived from the on-chip PLLs. The GO1525 frequency can be pulled approximately 32MHz for every one volt of control. The output level is typically -9.0dBm with low spurious and noise content. It is designed to drive 50Ω strip lines. The VCO requires a single 2.5V supply and draws a maximum of 15mA of current. It is packaged in a miniature 8-pin proprietary surface mount package and operates over the normal commercial temperature range of 0°C to +70°C. This component and all homogeneous subcomponents are RoHS compliant.
Applications VCO for the GS1560, GS1559 and GS9060 Deserializers, and the GS1532, GS1531 and GS9062 Serializers
Description The GO1525 is a self contained, miniature Voltage Controlled Oscillator (VCO). It produces a clean
VCTR
VCC
STRIPLINE
STRIPLINE
OUT
OSCILLATOR CIRCUIT
GND
GO1525 Functional Block Diagram
21969 - 8
July 2005
1 of 9 www.gennum.com
GO1525 Data Sheet
Contents
Key Features ........................................................................................
Similar Datasheet