DS28DG02

11/09 EV KIT AVAILABLE www.maxim-ic.com DS28DG02 2Kb SPI EEPROM with PIO, RTC, Reset, Battery Monitor, and Watchdog GENERAL DESCRIPTION The DS28DG02 combines 2Kb (256 x 8) EEPROM with 12 PIO lines, a real-time clock (RTC) and calendar with alarm function, a CPU reset monitor, a battery monitor, and a watchdog. Communication with the device is accomplished with an industrystandard SPI™ interface. The user EEPROM is organized as four blocks of 64 bytes each with single-byte and up to 16-byte page write capability. Additional registers provide access to PIOs and to setup functions. Individual PIO lines can be configured as inputs or outputs. The power-on state of PIOs programmed as outputs is stored in nonvolatile (NV) memory. All PIOs may be reconfigured by the user through the serial interface. The RTC/calendar operates in the 12/24-hour format and automatically corrects for leap years. Battery monitor threshold and watchdog timeout are userprogrammable through NV registers. The reset monitor generates a reset to the CPU if the voltage at the VCC pin falls below the factory-set limit. The reset output includes a debounce circuit for manual pushbutton reset. APPLICATIONS Asset-Tracking Systems Broadband Access Network Equipment Patient-Monitoring Systems Home Lighting Control Systems Holter Heart Monitors Typical Operating Circuit appears on page 32. Pin Configuration appears on page 33. FEATURES  2Kb (256 x 8) EEPROM Organized in Four 64-Byte Blocks  Single Byte and Up ...