PECL Video Cable Driver
www.DataSheet4U.com
ARIZONA MICROTEK, INC.
AZG489
PECL Video Cable Driver FEATURES
• • • • 720 Mb/s Typical Data Rate ...
Description
www.DataSheet4U.com
ARIZONA MICROTEK, INC.
AZG489
PECL Video Cable Driver FEATURES
720 Mb/s Typical Data Rate 1.6V Typical Output Swing Independent Outputs Operate in Phase 5V±10% Supply Voltage PACKAGE
SOIC 8
1 2
PACKAGE AVAILABILITY PART NUMBER
AZG489D
MARKING
AZG489
NOTES
1,2
Add R1 at end of part number for 7 inch (1K parts), R2 for 13 inch (2.5K parts) Tape & Reel. Date Code “YWW” on underside of part.
DESCRIPTION
The AZG489 is a multiple output cable driver specifically designed to drive coaxial video cables. The device is especially useful in Digital Video Broadcasting applications. Each output has its own output stage and thus each is isolated from the other outputs. The driver has a voltage gain of approximately 40 and produces an output swing of 1.6 volts, twice as large as a standard PECL output. When driving a coaxial cable, proper termination is required at both ends of the cable to minimize reflections. The 1.6V output signal allows for termination at both ends of the cable, while providing an 800mV signal at the receiving end of the cable. The driver accepts a standard differential PECL input and can be powered with a 5.0V supply. Under open input conditions internal input clamps will force all outputs HIGH. Additional power supply filtering is required because of the large amount of in-phase output current. A capacitor (0.1μF minimum) must bypass VCC to VEE in close proximity to the AZG489. A ferrite bead (1KΩ @ 100 MHz) must be plac...
Similar Datasheet