THREE CHANNEL E3/DS3/STS-1 LINE INTERFACE UNIT
www.DataSheet4U.com
xr
MARCH 2005
XRT75R03
REV. 1.0.7
THREE CHANNEL E3/DS3/STS-1 LINE INTERFACE UNIT WITH JITTER ATTE...
Description
www.DataSheet4U.com
xr
MARCH 2005
XRT75R03
REV. 1.0.7
THREE CHANNEL E3/DS3/STS-1 LINE INTERFACE UNIT WITH JITTER ATTENUATOR
GENERAL DESCRIPTION
The XRT75R03 is a three-channel fully integrated Line Interface Unit (LIU) featuring EXAR’s R3 Technology (Reconfigurable, Relayless Redundancy) with Jitter Attenuator for E3/DS3/STS-1 applications. It incorporates 3 independent Receivers, Transmitters and Jitter Attenuators in a single 128 pin LQFP package. Each channel of the XRT75R03 can be independently configured to operate in the data rate, E3 (34.368 MHz), DS3 (44.736 MHz) or STS-1 (51.84 MHz). Each transmitter can be turned off and tristated for redundancy support or for conserving power. The XRT75R03’s differential receiver provides high noise interference margin and is able to receive the data over 1000 feet of cable or with up to 12 dB of cable attenuation. The XRT75R03 incorporates an advanced crystalless jitter attenuator per channel that can be selected either in the transmit or receive path. The jitter attenuator performance meets the ETSI TBR-24 and Bellcore GR-499 specifications. The XRT75R03 provides both Serial Microprocessor Interface as well as Hardware mode for programming and control. The XRT75R03 supports local, remote and digital loop-backs. The device also has a built-in Pseudo Random Binary Sequence (PRBS) generator and detector with the ability to insert and detect single bit error for diagnostic purposes.
TRANSMITTER:
R3
Technology Redundancy)
(R...
Similar Datasheet