2.25V TO 3.6V QUAD UART
www.DataSheet4U.com
MAY 2007
XR16V564/564D
2.25V TO 3.6V QUAD UART WITH 32-BYTE FIFO
REV. 1.0.1
GENERAL DESCRIPTION
Th...
Description
www.DataSheet4U.com
MAY 2007
XR16V564/564D
2.25V TO 3.6V QUAD UART WITH 32-BYTE FIFO
REV. 1.0.1
GENERAL DESCRIPTION
The XR16V5641 (V564) is an enhanced quad Universal Asynchronous Receiver and Transmitter (UART) with 32 bytes of transmit and receive FIFOs, programmable transmit and receive FIFO trigger levels, automatic hardware and software flow control, and data rates of up to 16 Mbps at 4X sampling rate. Each UART has a set of registers that provide the user with operating status and control, receiver error indications, and modem serial interface controls. An internal loopback capability allows onboard diagnostics. The V564 is available in a 48-pin QFN, 64-pin LQFP, 68-pin PLCC and 80-pin LQFP packages. The 64-pin and 80-pin packages only offer the 16 mode interface, but the 48 and 68 pin packages offer an additional 68 mode interface which allows easy integration with Motorola processors. The XR16V564IV (64-pin) offers three state interrupt output while the XR16V564DIV provides continuous interrupt output. The XR16V564 is compatible with the industry standard ST16C554 and ST16C654/ 654D.
NOTE:
1 Covered by U.S. Patent #5,649,122.
FEATURES
Pin-to-pin compatible with ST16C454, ST16C554,
TI’s TL16C754B and Philip’s SC16C754B
Intel or Motorola Data Bus Interface select Four independent UART channels
■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Register Set Compatible to 16C550 Data rates of up to 16 Mbps 32 byte Transmit FIFO 32 byte Receive FIFO with error tags 4 Selectable TX and RX FIF...
Similar Datasheet