SPA547-01

www.DataSheet4U.com Solid State Devices, Inc. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SPA547-01 Designer’s Data Sheet FEATURES: 100kHz Operation Airborne Application up to 50,000 ft High Efficiency Low EMI / Corona Discharge Thermally Conductive Aluminum Base Plate Helicoil Mounting Inserts ESS Screening Available. Consult Factory. Exterior Surfaces Sandblasted to Promote Adhesion of Encapsulation in Subsequent Assembly HYPERFAST HIGH VOLTAGE DIODE BRIDGE ASSEMBLY 10.5 kV / 1.5A MAXIMUM RATINGS (Per Leg, Unless Otherwise Specified) Peak Repetitive Reverse Voltage and DC Blocking Voltage Half Wave Rectified Forward Current Averaged Over Fully Cycle (Resistive Load, 60 Hz, Sine Wave, TC =100oC) Peak Surge Current (TC =55oC, 8.3 ms Pulse, Superimposed on Rated Current at Rated Voltage) Maximum Individual Partial Discharge (V = 15kV, t = 1min, All Terminals in Common to Base) Maximum Dielectric Voltage Operating Temperature Range (Base plate) Storage Temperature Range Maximum Thermal Resistance (Per Diode) Junction to Case Electrical Schematic E16 E14 E12 E10 E8 E6 Symbol VRRM VR IO IFSM Value 3,000 0.8 40 10 Units Volts Amps Amps pC Volts o o VDIEL TOP BASE TSTG RθJC 15,000 -45 to +100 -55 to +150 15 C C ºC/W E4 E2 19 E17 E15 E13 E11 E9 E7 E5 E3 E1 NOTE: All specifications are subject to change without notification. SCD’s for these devices should be ...