MFR4300

www.DataSheet4U.com MFR4300 Data Sheet FlexRay Communication Controllers MFR4300 Rev. 3 04/2007 freescale.com MFR4300 Data Sheet MFR4300 Rev. 3 04/2007 To provide the most up-to-date information, the revision of our documents on the World Wide Web will be the most current. Your printed copy may be an earlier revision. To verify that you have the latest information available, refer to http://www.freescale.com/flexray. The following revision history table summarizes changes contained in this document. For your convenience, the page number designators have been linked to the appropriate location. Revision History Date 3/2006 4/2006 Revision Level 0 1 Initial release - Preliminary. Official release Chapter 3 revised extensively. Minor changes to other chapters. Table 1-1: Added definitions for ID and PHY Table 2-3: Changed INT_CC# RESET value from 1 to 0 Table 6-3: Corrected ECS bit description (actions defined by 0 and 1 were reversed). Figure 6-6: Removed glitch from RESET# waveform. Table A-9: Changed maximum value of VPORD from 2.05 to 2.07. Table A-11: Changed “POR release level” to “POR deassert level”. Table A-11: Changed “VPORR” to “VPORD”. Table A-11, A.3.1.1, A.3.1.2, A.3.1.2, Table A-12: Updated to remove information relating to clock quality check block. Updated Mechanical Outline drawing in Figure B-1, Figure B-2, and Figure B-3 from Rev. D to Rev. E (to correct coplanarity specification). Applied latest version of back page. Fixed inconsistencies in naming co...