(MAZDxxx) Silicon planar type
Zener Diodes www.DataSheet4U.com
MAZDxxx Series
Silicon planar type
Unit: mm
For constant voltage, constant current, w...
Description
Zener Diodes www.DataSheet4U.com
MAZDxxx Series
Silicon planar type
Unit: mm
For constant voltage, constant current, waveform clipper and surge absorption circuit ■ Features
Low noise type
0.60±0.05 1
0.20±0.05
0.12+0.05 –0.02
1.00±0.05
1.40±0.05
2
■ Absolute Maximum Ratings Ta = 25°C
Parameter Repetitive peak forward current Total power dissipation Junction temperature Storage temperature
*
0.27+0.05 –0.02
Symbol IFRM PT Tj Tstg
Rating 200 120 150 −55 to +150
Unit mA mW °C °C
5°
0.15 max. 0.52±0.03
0 to 0.01
Note) *: Ptot = 100 mW achieved with a printed circuit board
Marking Symbol Refer to the list of the electrical characteristics within part numbers (Example) MAZD062: DF
■ Common Electrical Characteristics Ta = 25°C ± 3°C *1
Parameter Forward voltage Zener voltage *2 Zener operating resistance Reverse current Symbol VF VZ RZ IR IF = 10 mA IZ IZ VR Specified value Specified value Specified value Conditions Min Typ 0.9 Refer to the list of the electrical characteristics within part numbers Max 1.0 Unit V V Ω µA
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7031 measuring methods for diodes. 2. Absolute frequency of input and output is 5 MHz. 3. *1: The temperature must be controlled 25°C for VZ mesurement. VZ value measured at other temperature must be adjusted to VZ (25°C) *2: VZ guaranteed 20 ms after current flow.
5°
1: Anode 2: Cathode SSSMini2-F2 Package
0.20±0.05
Publication date: September 2004
SKE00020AED
1
M...
Similar Datasheet