Document
NOT RECOMMENDED FOR NEW DESIGNS USE ES1A-LTP~ES1J-LTP Series
MCC TM
Micro Commercial Components
omponents 20736 Marilla Street Chatsworth !"# $
% !"#
ES1AE THRU ES1ME
Features
• Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates Compliant. See ordering information)
• Epoxy meets UL 94 V-0 flammability rating
• Moisture Sensitivity Level 1 x High Temp Soldering: 260qC for 10 Seconds At Terminals
x Superfast Recovery Times For High Efficiency • Halogen free available upon request by adding suffix "-HF"
Maximum Ratings
x Operating Temperature: -50qC to +150qC x Storage Temperature: -50qC to +150qC x Maximum Thermal Resistance; 15qC/W Junction To Lead
MCC Part Number
ES1AE ES1BE ES1CE ES1DE ES1GE ES1JE ES1KE ES1ME
Device Marking
ES1A ES1B ES1C ES1D ES1G ES1J ES1K ES1M
Maximum Recurrent Peak Reverse Voltage
50V 100V 150V 200V 400V 600V 800V 1000V
Maximum RMS
Voltage
35V 70V 105V 140V 280V 420V 560V 700V
Maximum DC
Blocking Voltage
50V 100V 150V 200V 400V 600V 800V 1000V
Electrical Characteristics @ 25qC Unless Otherwise Specified
Average Forward Current
IF(AV)
1.0A TJ = 75qC
Peak Forward Surge
IFSM
Current
30A 8.3ms, half sine
Maximum
Instantaneous
Forward Voltage
ES1AE-DE VF ES1GE-JE ES1KE~ME
.975V IFM = 1.0A;
1.35V TJ = 25qC* 1.70V
Maximum DC
Reverse Current At Rated DC Blocking Voltage
IR
5PA TJ = 25qC
100PA TJ = 100qC
Maximum Reverse
Recovery Time
ES1AE-DE
Trr
ES1GE-KE
ES1ME
50ns 75ns 100ns
IF=0.5A, IR=1.0A, Irr=0.25A
Typical Junction Capacitance
CJ
45pF Measured at
1.0MHz, VR=4.0V
*Pulse test: Pulse width 200 Psec, Duty cycle 2%
Note: 1. High Temperature Solder Exemptions Applied, see EU Directive Annex 7.
1 Amp Ultra Fast Recovery
Silicon Rectifier 50 to 1000 Volts
DO-214AC (SMAE)
H
Cathode Band
J
A
C
E
D
B
G
DIMENSIONS
INCHES
DIM
MIN
MAX
A
.079
.096
B
.045
.071
C
.002
.008
D
---
.02
E
.030
.060
G
.189
.208
H
.157
.180
J
.090
.115
MM MIN 2.01 1.15 .05 --.76 4.80 4.00 2.29
MAX 2.44 1.80 .20 .51 1.52 5.30 4.57 2.92
SUGGESTED SOLDER PAD LAYOUT
0.090”
NOTE
0.085”
0.070”
Revision: C
www.mccsemi.com
1 of 4
2015/10/19
INSTANTANEOUS FORWARD CURRENT,(A)
ES1AE thru ES1ME
Figure 1 Typical Forward Characteristics
50
ES1AE~DE
10 3.0 1.0
ES1GE~JE
ES1KE~ME
0.1
.01 .6
.8 1.0 1.2 1.4 1.6 1.8 2.0
FORWARD VOLTAGE,(V)
Instantaneous Forward Current - Amperesversus Instantaneous Forward Voltage - Volts
MCC TM
Micro Commercial Components
Figure 2 Forward Derating Curve
2.4
2.2 2.0
1.8 1.6 1.4
1.2 Amps
1.0
.8
.6
.4 Single Phase, Half Wave
.2 60Hz Resistive or Inductive Load
0 0
25
50 75 100 125 150
°C Average Forward Rectified Current - Amperesversus Ambient Temperature -°C
Figure 3 Junction Capacitance
100 60 40
20 pF
10
6 4
2 1
.1 .2 .4
TJ=25°C
12
4
Volts
10 20 40
Junction Capacitance - pFversus Reverse Voltage - Volts
100 200 400
1000
Revision: C
www.mccsemi.com
2 of 4
2015/10/19
ES1AE thru ES1ME
Figure 4 Peak Forward Surge Current 30
25
20
15 Amps
10
5
0 12
4 6 8 10 20 40 60 80 100
Cycles
Peak Forward Surge Current - Amperesversus Number Of Cycles At 60Hz - Cycles
MCC TM
Micro Commercial Components
Figure 6 Reverse Recovery Time Characteristic And Test Circuit Diagram
50Ω
10Ω
25Vdc
1Ω
Notes: 1. Rise Time = 7ns max. Input impedance = 1 megohm, 22pF 2. Rise Time = 10ns max. Source impedance = 50 ohms 3. Resistors are non-inductive
Pulse Generator
Note 2
Oscilloscope Note 1
trr +0.5A
0 -0.25
-1.0 1cm
Set Time Base for 20/100ns/cm
Revision: C
www.mccsemi.com
3 of 4
2015/10/19
MCC TM
Micro Commercial Components
Ordering Information :
Device Part Number-TP
Note : Adding "-HF" suffix for halogen free, eg. Part Number-TP-HF
Packing Tape&Reel: 6Kpcs/Reel
***IMPORTANT NOTICE***
Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages.
***LIFE SUPPORT***
MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation.
***CUSTOMER AWARENESS***
Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purch.