MCZ33395

www.DataSheet4U.com Freescale Semiconductor Document Number: MC33395 Technical Data Rev 4.0, 2/2007 Three-Phase Gate Driver IC The 33395 simplifies the design of high-power BLDC motor control design by combining the gate drive, charge pump, current sense, and protection circuitry necessary to drive a three-phase bridge configuration of six N-channel power MOSFETs. Mode logic is incorporated to route a pulse width modulation (PWM) or a complementary PWM output signal to either low-side or high-side MOSFETs of the bridge. Detection and drive circuitry are also incorporated to control a reverse battery protection high-side MOSFET switch. PWM frequencies up to 28 kHz are possible. Built-in protection circuitry prevents damage to the MOSFET bridge as well as the drive IC and includes overvoltage shutdown, overtemperature shutdown, overcurrent shutdown, and undervoltage shutdown. The device is parametrically specified over ambient temperature range of -40°C ≤ TA ≤ 125°C and 5.5 V ≤ VIGN ≤ 24 V supply. Features Drives Six N-Channel Low RDS(ON) Power MOSFETs Built-In Charge Pump Circuitry Built-In Current Sense Comparator and Output Drive Current Limiting Built-In PWM Mode Control Logic Built-In Circuit Protection Designed for Fractional to Integral HP BLDC Motors 32-Pin SOIC Wide Body Surface Mount Package 33395 Incorporates a <5.0 µs Shoot-Through Suppression Timer 33395T Incorporates a <1.0 µs Shoot-Through Suppression Timer Pb-Free Packaging Designated by ...