DatasheetsPDF.com

IRK27 Dataheets PDF



Part Number IRK27
Manufacturers International Rectifier
Logo International Rectifier
Description ADD-A-pak-TM GEN V Power Modules
Datasheet IRK27 DatasheetIRK27 Datasheet (PDF)

www.DataSheet4U.com Bulletin I27130 rev. G 10/02 IRK.26 SERIES THYRISTOR/ DIODE and THYRISTOR/ THYRISTOR Features High Voltage Industrial Standard Package Thick Al metal die and double stick bonding Thick copper baseplate UL E78996 approved 3500VRMS isolating voltage ADD-A-pakTM GEN V Power Modules Benefits Up to 1600V Full compatible TO-240AA High Surge capability Easy Mounting on heatsink Al203 DBC insulator Heatsink grounded 27 A Mechanical Description The Generation V of Add-A-pak modu.

  IRK27   IRK27



Document
www.DataSheet4U.com Bulletin I27130 rev. G 10/02 IRK.26 SERIES THYRISTOR/ DIODE and THYRISTOR/ THYRISTOR Features High Voltage Industrial Standard Package Thick Al metal die and double stick bonding Thick copper baseplate UL E78996 approved 3500VRMS isolating voltage ADD-A-pakTM GEN V Power Modules Benefits Up to 1600V Full compatible TO-240AA High Surge capability Easy Mounting on heatsink Al203 DBC insulator Heatsink grounded 27 A Mechanical Description The Generation V of Add-A-pak module combine the excellent thermal performance obtained by the usage of Direct Bonded Copper substrate with superior mechanical ruggedness, thanks to the insertion of a solid Copper baseplate at the bottom side of the device. The Cu baseplate allow an easier mounting on the majority of heatsink with increased tolerance of surface roughness and improve thermal spread. The Generation V of AAP module is manufactured without hard mold, eliminating in this way any possible direct stress on the leads. The electrical terminals are secured against axial pull-out: they are fixed to the module housing via a click-stop feature already tested and proved as reliable on other IR modules. Electrical Description These modules are intended for general purpose high voltage applications such as high voltage regulated power supplies, lighting circuits, temperature and motor speed control circuits, UPS and battery charger. Major Ratings and Characteristics Parameters IT(AV) or IF(AV) @ 85°C IO(RMS) (*) ITSM @ 50Hz IFSM @ 60Hz I t 2 IRK.26 27 60 400 420 800 730 8000 400 to 1600 - 40 to 125 - 40 to125 Units A A A A A2s A2s A 2√ s V o o @ 50Hz @ 60Hz I 2√ t VRRM range TSTG TJ (*) As AC switch. C C www.irf.com 1 IRK.26 Series Bulletin I27130 rev. G 10/02 ELECTRICAL SPECIFICATIONS Voltage Ratings Type number Voltage Code 04 06 08 IRK.26 10 12 14 16 VRRM , maximum VRSM , maximum VDRM , max. repetitive repetitive non-repetitive peak off-state voltage, peak reverse voltage peak reverse voltage gate open circuit V V V 400 600 800 1000 1200 1400 1600 500 700 900 1100 1300 1500 1700 400 600 800 1000 1200 1400 1600 IRRM IDRM 125°C mA 15 On-state Conduction Parameters IT(AV) IF(AV) Max. average on-state current (Thyristors) Max. average forward current (Diodes) IO(RMS) Max. continuous RMS on-state current. As AC switch ITSM or IFSM Max. peak, one cycle non-repetitive on-state or forward current 60 A 400 420 335 350 470 490 I2t Max. I2t for fusing 800 730 560 510 1100 1000 I2√t Max. I2√ t for fusing (1) voltage (2) rt VTM VFM di/dt Max. value of on-state slope resistance (2) Max. peak on-state or forward voltage Max. non-repetitive rate of rise of turned on current IH IL Max. holding current Max. latching current 200 mA 400 150 A/µs 1.95 V 8000 0.92 0.95 12.11 11.82 A2√s V mΩ A s 2 IRK.26 27 27 Units Conditions 180o conduction, half sine wave, TC = 85oC I(RMS) t=10ms t=8.3ms t=10ms t=8.3ms t=10ms t=8.3ms t=10ms t=8.3ms t=10ms t=8.3ms t=10ms t=8.3ms reapplied or I(RMS) Sin.


IRK26 IRK27 IRKT26


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)