1/4
STRUCTURE
Silicon Monolithic Integrated Circuit
TYPE
Positive and Negative Variable Linear Regulator
PRODUCT SE...
1/4
STRUCTURE
Silicon Monolithic Integrated Circuit
TYPE
Positive and Negative Variable Linear
Regulator
PRODUCT SERIES
ＢＤ３９１６ＦＶＭ
FEATURES
1. Built-in positive (REG1) and negative (REG2) Linear
Regulator for CCDs/ Variable output/ Low dropout voltage type.
2. Built-in Discharge circuit. Negative output voltage (REG2) turns off immediately, after STB turns off.
○ABSOLUTE MAXIMUM RATINGS (Ta=25℃)
Parameter
Symbol
Limit
Unit
Positive Supply Voltage
VCC
+18 ※1
V
Negative Supply Voltage
VEE
-18 ※1
V
Power Dissipation
Pd
470 ※2
mW
Operating Temperature Range
Topr
-40～+85
℃
Storage Temperature Range
Tstg
-55～+125
℃
Maximum Junction Temperature
Tjmax
125
℃
※1 Not to exceed Pd. ※2 Reduced by 4.7mW/℃ over Ta=25℃ ,when mount on a glass epoxy board:70mm×70mm×1.6mm｡
○OPERATING CONDITIONS
Parameter
Symbol
Min
Max Unit
Positive Supply Voltage
VCC
+6.0
+18.0
V
Negative Supply Voltage
VEE
-14.0
-6.0
V
REG1 Output Voltage
Vo1
Vctl1 *1
+16.0
V
REG2 Output Voltage
Vo2
-8.5
Vctl2 *2
V
Output Current 1 Io1 － 25 mA
Output Current 2 Io2 － 50 mA
*1 REG1,CTL1 Short *2 REG2,CTL2 Short ※ Vdropout(REG1) × Io(REG1) + Vdropout(REG2) × Io(REG2) not to exceed Pd=470mW.
NOTE) The product described in this specification is a strategic product (and/or service) subject to COCOM regulations. It should not be exported without authorization from the appropriate government.
REV. C
2/4
○ELECTRICAL CHARACTERISTICS(Unless otherwise specified, Ta=25℃,...
