GaAs SPDT Reflective Switch
www.DataSheet4U.com
RoHS Compliant
SW-137-PIN V3
GaAs SPDT Reflective Switch, 0.01 - 3.0 GHz
Features
• • • • • • Isol...
Description
www.DataSheet4U.com
RoHS Compliant
SW-137-PIN V3
GaAs SPDT Reflective Switch, 0.01 - 3.0 GHz
Features
Isolation: 48 dB Typical at 1 GHz High Intercept Point Over Wide Bandwidth Trise, Tfall: 5 nS Typical DIP Package Integral TTL Driver (CMOS Compatible) 50 Ohm Nominal Impedance
Functional Block Diagram
Description
M/A-COM’s SW-137 is a GaAs MMIC SPDT reflective switch with an integral Silicon ASIC driver. This device is in a 14-lead DIP package. These switches offer high intercept points over a wide bandwidth of operation, while maintaining low DC power dissipation. These switches exhibit excellent performance and repeatability from 0.01 to 3.0 GHz. The SW-137 is ideally suited for RF/IF communications applications. Contact the factory for environmental screening.
Ordering Information
Part Number
SW-137-PIN
Package
DI-1
Note: Reference Application Note M513 for reel size information. Note: Die quantity varies.
Truth Table
Control Inputs Condition of Switch RF Common to each RF Port RF1
On Off
Absolute Maximum Ratings 2
Parameter
Max Input Power 0.05 GHz 0.5 - 3.0 GHz Supply Voltages Vcc Vee Control Voltage Operating Temperature Storage Temperature Absolute Maximum +27 dBm +34 dBm -0.5V to +16.5 V -16.5V to +0.5V -0.5V to VCC to +0.5V -55°C to +125°C -65°C to +150°C
C1
Low High
RF2
Off On
Current (mA)
± 9V Vcc Vee
8 4
± 12V
11 7
± 15V
15 9
2. Operation of this device above any one of these parameters may cause permanent damage.
* Restrictions on Haz...
Similar Datasheet