S11

www.DataSheet4U.com S11 10 to 500 MHz THIN FILM SPST SWITCH LOW INSERTION LOSS: < 2.5 dB (TYP.) HIGH ON/OFF RATIO: 60 dB (TYP.) LOW VSWR: 1.6:1 (TYP.) TTL COMPATABLE Schematic Diagram Typical < 1. 7 dB < 2.0 dB < 2.5 dB > 67 dB > 62 dB > 48 dB 1.9:1 8 ns 45 mA 0° to 50°C Specifications (Rev. Date: 3/02)* Characteristics Insertion Loss (max.) 10-100 MHz 100-300 MHz 300-500 MHz Isolation 10-100 MHz 100-300 MHz 300-500 MHz VSWR Input/Output (max.) in ON state 10-500 MHz Switching Speed (10-90%) DC Current (max.) at +5V *Measured in a 50-ohm system at +5 Vdc Nominal. Guaranteed -54° to +85°C 2.3 dB 2.6 dB 4.0 dB 54 dB 50 dB 39 dB 2.4:1 20ns 55 mA 2.7 dB 3.0 dB 4.5 dB 52 dB 48 dB 36 dB 2.6:1 20 ns 60 mA Absolute Maximum Ratings Ambient Operating Temperature Storage Temperature Max. Case Temperature Max. DC Voltage Max. Continuous RF Input Power Max. Short Term RF Input Power Max. Peak Power (1 minute max.) “S” Series Burn-in Temperature (Case) -54° to +125°C -62°C to +125°C 125°C +6 Volts +10 dBm 100 mW 1W 125°C Switching Conditions Input Pins A B ON State 0 0 1 1 Off State 1 0 0 1 Outline Drawings Package Figure Model TO-8 BE S11 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or applic...